Furuno NX-700B manual 2.14Icons, 2-15, Edit, Meaning, Status icon shown at the tip of display

2. OPERATION

Edit

Delete

7.Press ▲ or ▼ to choose Delete, and then press the ENT key. The message “Delete station?” appears.

8.Press ◄ to choose “Yes”, and then press the ENT key to close the edit window.

9.Press the MENU/ESC key several times to close the menu.

2.14Icons

The NX-700 shows various icons to denote equipment status, and these are as shown in the table below.

Icon

Status

Meaning

Status icon (shown at the tip of display)

Blinking	Shows that an International frequency (518 kHz)
	message has not been read.

		L1	Blinking	Shows that a Local frequency message has not
				been read.
		L2	Blinking
				L1: 490 kHz, L2: 4209.5 kHz
			Blinking	Appears while receiving a message.
		I
				I: International frequency (518 kHz)
		L1	Blinking
				L1: 490 kHz
			Blinking
		L2		L2: 4209.5 kHz
			Lighting	Displayed when the voltage of the internal battery is
				low. The message “Battery error” also appears on
				the display.
				Print error (no paper, not connected to the printer,
		X	Lighting	etc.). The message “Printer error” also appears on
				the display.
			Lighting	While printing.
		P
		R
Message icon (shown next to messages)
	NEW			Displayed when message is displayed for the first
			Lighting	time.
				(This icon disappeared after showing the detail or 24
				hours has passed.)
			Lighting	Displayed when message type D (SAR) is displayed.
	SAR
			Lighting	Appears when message type A, B or L (Warning) is
				displayed.
			Lighting	Protected message

2-15