3. MAINTENANCE & TROUBLESHOOTING
3.4Diagnostics
The memory test checks ROM, RAM, data port, battery, keyboard and LCD for proper operation and displays program version numbers.
1.Press the MENU/ESC key to open the main menu.
2.Press ▼ to choose Service, and then press the ENT key.
3.Press ▲ or ▼ to choose Test, and then press the ENT key. The message “Start test?” appears.
4.Press ◄ to choose “Yes”, and then press the ENT key.
Memory Test
Program No | : |
Boot | : |
ROM | : OK |
SRAM | : OK |
DRAM | : OK |
CPU RAM | : OK |
EEPROM | : OK |
Battery | : OK (3.2V) |
Hit any key.
*: Program version no.
Memory test
For any NG (No Good), contact your dealer.
5.When the message “Hit any key.” appears at the bottom of screen, press any key (except 
key) to show the key test screen.
Key Test
If there is no operation for 10 s, the screen changes.
Key test
6.Press each key (except 
key) one by one.
A key is functioning properly if its
7.After all keys have been tested or no key is pressed after 10 seconds, the equipment starts the LCD test by showing the white and black display (level 0 to 9).
