Chapter 11: Using a Wireless Ethernet Network

7

8

Click OK to close the TCP/IP Properties dialog box.

Click OK to close the Network dialog box.

Connecting to a wireless Ethernet network in Windows 2000

After you have set up your profiles for all the possible wireless Ethernet networks you may want to connect to, you can select which network to access.

To connect to a wireless Ethernet network:

1 Right-click the ORiNOCO Client Manager icon on the taskbar.

2 Click Configuration Profile, then click the profile for the network you want to access.

Turning your wireless Ethernet on or off in Windows 2000

There are times, such as when you are flying in an aircraft, when you should turn off your wireless Ethernet network. You can also turn off wireless Ethernet to conserve the battery charge on your notebook.

To turn wireless Ethernet on or off using the Client Manager:

1 Right-click the ORiNOCO Client Manager icon on the taskbar.

2 Click Enable Radio to turn on wireless Ethernet or Disable Radio to turn off wireless Ethernet.

210

www.gateway.com

Page 216
Image 216
Gateway 1450 Connecting to a wireless Ethernet network in Windows, Turning your wireless Ethernet on or off in Windows