183
Using wireless Ethernet in Windows XP
www.gateway.com
6Click Add. The Wireless Network Properties dialog box opens.
7Type the name of the network in the Network name (SSID) box. For an
access point network, we recommend using the name of the access point
device followed by the SSID name found on the back of the access point.
Example: RG1000 1ff60a.
8Click the Data encryption (WEP enabled) check box.
9Click to clear the The key is provided for me automatically check box.
10 Type the network key in the Network key box. This key must be the last
five digits of the network name, for example ff60a.
11 Click the arrow button to open the Key format list, then click ASCII
characters.
12 Click the arrow button to open the Key length list, then click 40 bits (5
characters).
13 Click the up or down arrow button next to Key index (advanced) to select 0.