Gateway 1450 275, You cannot connect to the Internet, Your 56K modem does not connect at 56K

275
Troubleshooting
www.gateway.com
■Disconnect any answering machine, fax machine, or printer that is on
the same line as the modem. You should not have these devices plugged
into the same telephone line as the modem.
■Make sure that you are not using a digital, rollover, or PBXline. These
lines do not work with your modem.
■Check for line noise (scratchy, crackling, or popping sounds). Line noise
is a common problem that can cause the modem to connect at a slower
rate, abort downloads, or even disconnect. The faster the modem, the
less line noise it can tolerate and still work correctly.
■Listen to the line using your telephone. Dial a single number (such as1).
When the dial tone stops, listen for line noise. Wiggle the modem cable
to see if that makes a difference. Make sure that the connectors are free
from corrosion and all screws in the wall or telephone wall jack are secure.
■You can also call your telephone service and have the telephone line
checked for noise or low line levels.
■Try another telephone line (either a different telephone number in your
house or a telephone line at a different location). If you can connect on
this line, call your telephone service.
■Try connecting with the modem at a lower connection speed. If reducing
the connect speed lets you connect, contact your telephone service. The
telephone line may be too noisy.
You cannot connect to the Internet
■The ISP may be having technical difficulties. Contact your ISP technical
support for help.
■See if the modem works with a different communications program. The
problem may be with just one program.
Your 56K modem does not connect at 56K
Current FCC regulations restrict actual data transfer rates over public
telephone lines to 53K. Other factors, such as line noise, telephone service
provider equipment, or ISP limitations, may lower the speed even further.
Help and
Support
For more information about dialing settings in WindowsXP,
click Start, then click Help and Support.
Type the keyword dialing in the HelpSpot Search box
, then click the arrow.