16
Chapter 2: Getting Started
www.gateway.com
Connecting the AC adapter
You can run your notebook using an ACadapter or the notebook battery. The
battery was shipped to you partially charged. You should use the ACadapter
right away to fully charge the battery. Allow 24hours for the battery to fully
charge.

To connect the AC adapter:

1Connect the power cord to the ACadapter.
Important If the battery is not fully charged before you use your
notebook on battery power for the first time, the battery life
may be much shorter than you expect. If the battery life
seems short even after being charged for 24hours, the
battery may need to be recalibrated. For information on
recalibrating the battery, see “Recalibrating the battery” on
page132.
Warning Replace the power cord if it becomes damaged. The
replacement cord must be of the same type and voltage
rating as the original cord or your notebook may be
damaged.