Gateway 1450 specifications 245, Updating device drivers

If your system came equipped with an internal embedded wireless device, see “Safety, Regulatory, and Legal Information” on page 289 for general wireless regulatory and safety guidelines.To find out if your system has an internal wireless device, check the label (see “Identifying your model” on page 10).

To update device drivers:

1 Insert the red Gateway CD into your CD or DVD drive. The System Restoration Kit program starts. Go to Step 5.

- OR -

If the program does not start automatically, go to Step 2.

2 Click Start, then click Run. The Run dialog box opens.

3 In the Open text box, type d:\runmenu.exe (where d is the drive letter of your CD or DVD drive).

4 Click OK. The System Restoration Kit program starts.

5 If the Welcome to the System Restoration Kit window opens, close it by clicking OK.

If your system came equipped with a wireless device, only use the drivers approved for the country the device will be used in. See the red Gateway CD or the Gateway Technical Support Web site (www.gateway.com/support).

Updating device drivers

The Restoration CDs contain a device driver update utility that works over the Internet. If you do not have an Internet Service Provider, the update utility works by direct-dialing the device driver update service.

Click the Update tab.

Important

Updating device drivers

6

7

Click Check Now. The Connect window opens.

www.gateway.com 245