Gateway 400 manual Power, To create a startup password, 138

Highlight Enabled, then press ENTER.

Chapter 9: Travel Tips

To create a startup password:

1 Restart your notebook. As soon as you see a startup screen, press F2. The BIOS Setup utility opens.

2 Open the Security menu, then highlight Set Supervisor Password, then press ENTER and follow the instructions. You must set the supervisor password in order to set the user (startup) password.

3 Highlight Set User Password, then press ENTER and follow the instructions. This is the password you need to enter at startup.

4 Highlight Password on boot, then press ENTER.

5

6 To exit the BIOS Setup utility, open the Exit menu, then select Exit Saving Changes. When you start your computer, you are prompted to enter the user password you set in Step 3.

Power

■Take your AC power adapter to recharge the battery. If you are traveling internationally, take power plug adapters.

■Take a portable surge protector to protect your notebook from power surges.

■To get the best performance from your notebook, avoid using the battery whenever possible, monitor the battery charge, and use the most efficient power management settings.

■For information on conserving battery power, see “Conserving battery power” on page 127.

■For information on using alternate power sources, see “Using alternate power sources” on page 127.

■For information on monitoring the battery charge, see “Monitoring the battery charge” on page 122.

138 www.gateway.com