Using a wired Ethernet network

Using a wired Ethernet network

A wired Ethernet network consists of two or more computers connected together through an Ethernet cable. This connection type is commonly used in offices around the world and can be used to build computer networks in the home.

Ethernet, Fast Ethernet, or Gigabit Ethernet

Ethernet is available at three different speeds. Standard Ethernet runs at 10 Mbps, Fast Ethernet runs at 100 Mbps, and Gigabit Ethernet runs at 1000 Mbps. Most home networks are built using Standard or Fast Ethernet components. Business networks are typically built using Fast or Gigabit Ethernet components.

To create a wired Ethernet network, you or your electrician must:

Install special Ethernet cables in your home or office

Important

Check local code requirements before installing Ethernet cable or other wiring in your home or office. Your municipality may require you to obtain a permit and hire a licensed installer.

Install an Ethernet card in each of your desktop computers (if your computers do not already have built-in Ethernet jacks)

Install an Ethernet PC Card in each of your notebooks (if your notebooks do not already have built-in Ethernet jacks)

Install an Ethernet router, switch, or hub

Tips & Tricks

If you are connecting just two computers, you can eliminate the router, switch, or hub and use a special crossover cable.

www.gateway.com

159

Page 167
Image 167
Gateway 400 manual Using a wired Ethernet network, Ethernet, Fast Ethernet, or Gigabit Ethernet, 159