GFK-1425B Touch Display Products: IC752CTD400/450 13
AC Power Input
The power input connector is a standard CEE22 type. A power cable is supplied with the Touch
Display unit.
The power supply is auto-ranging, therefore no configuration is needed to change the unit between
110 volt AC and 240 volt AC operation. Check that the fuse is of the correct rating for the supply
voltage.
The panel mounted power input connector houses a 5 x 20mm fuse in a compartment adjacent to
the input socket. The fuse-holder can be accessed only when the power lead is withdrawn.
Fuse value
2 amps for 240 volt working
4 amps for 110 volt working.
Keyboard
No keyboard is supplied with the Touch Display product. A PC AT keyboard is required to
configure the application software. After configuration, the Touch Display can be operated without
a keyboard by using the built-in touch screen.
The keyboard connector is a standard 6-pin DIN type, female connector.
12
3
6
4
5