Operating the DVI KVM over IP
USB Control
USB under Multicast Mode
When connecting USB devices to the DVI KVM over IP, the functionality is similar to that of video and
For an example, we’ll begin with the last diagram and connect another keyboard and mouse device to Receiver R1. This will allow us to control the computer from two separate locations.
Figure 2.9 - Using USB devices under multicast mode.
DVI Out
Receiver unit
LAN
| R |
| 2 |
DVI Out | Receiver unit |
|
| R | 07 |
| Sender unit |
| 1 |
|
| |
|
|
| S | |
07 |
|
|
| 2 |
| Sender unit |
|
| |
|
| S | 07 | USB cable |
|
| 1 |
|
|
DVI In
05
Sender unit
S3
DVI In
09
DVI In
1.Make sure the desired Sender and Receiver units are set to multicast mode. Refer to
Configuring Multicast Mode if necessary.
2.Access the Web interface for the Sender unit.
3.Click the Functions tab.
4.Locate the USB over IP group and make sure the Enable USB over IP box is checked. This is the default setting.
page 32
