Exabyte 1X7 LTO manual Changing the Emulation Mode

										SETTING CONFIGURATION OPTIONS
5.	Press	to display the tape drive SCSI ID selection screen:
			S	e l e c t			S C S I			I D
			N	e w		D r i v e			I D n
6.	Press	or		to scroll through the available values until the one you want
	appears. The default SCSI ID for the tape drive is 1.
7.	Press	to select the new value. A confirmation message appears:
			S	e	t	D r i	v	e	I	D
			t	o	n	n	o	w	?
8.	Press	to enact the change (or						if you don’t want to make the change).
	The tape drive resets and the new ID takes effect. The Configuration menu
	is displayed.
9.	Press	(as needed) to return to the Home screen.

CHANGING THE EMULATION MODE

By default, the autoloader operates in Native emulation mode and returns the product identification, “Magnum 1x7,” in response to a SCSI INQUIRY command from an application. If your autoloader software has not yet been certified for the Magnum 1x7 LTO Autoloader, you can select an option that allows the autoloader to emulate the VXA AutoPak 1x10 autoloader, Exabyte EZ17 autoloader, or the Exabyte 210 library. Table 3-4lists the available emulation modes for the autoloader.

Table 3-4Emulation modes for the Magnum 1x7 LTO Autoloader

Emulation Mode	Returns this Product Identification in response to an INQUIRY command
Native 2-U	The default Product Identification stored in the autoloader’s microcode.
AutoPak 110	“VXA_AutoPak_1x10” where each “_” represents an ASCII space character.
Exabyte EZ17	“Exabyte EZ17_ _ _ _” where each “_” represents an ASCII space character.
Exabyte 210	“EXB-210_ _ _ _ _ _ _ _ _” where each “_” represents an ASCII space character.

To change the emulation mode:

1.At the Home screen, press , , , or to access the main menus. If necessary, enter the operator panel password (see page 42).

OCTOBER 2006 MAGNUM 1X7 LTO AUTOLOADER

31