Exabyte 1X7 LTO manual If you enable security through your application, use

CHAPTER 3—CONFIGURING THE AUTOLOADER

Whichever method you use to enable security (operator panel password or application), you must also use it to disable security. That is, if you enable a password at the operator panel, you must disable it at the operator panel. If you enable security through your application, you must disable it through the application.

! Important	If you enable security through your application, use of the
	cartridge access port is not prevented. Separate commands for
	preventing and allowing use of the cartridge access port may be
	available through your application. Refer to your software
	documentation for information.

RESTORING THE DEFAULT CONFIGURATION

If necessary you can return all of the autoloader configuration settings to their default values.

! Important	When you use this option all changes that you previously made to
	any of the autoloader’s configuration settings are lost.

To restore the default configuration values:

1.At the Home screen, press , , , or to access the main menus. If necessary, enter the operator panel password (see page 42).

2.Press or until the Configuration menu appears:

C	h	a	n g e	a
C	o	n	f i g	u r a t i o n

3.	Press	to see the menu selections.
4.	Press	or		until the following screen appears:
			C	o n f i g u r a t i o n s ?
			R	e s e t	t o	D e f a u l t
5.	Press	to display the restore default configuration screen:
			C	o n f i g .		N o w ?
				L T O	1 X 7	2 U
6.	Press	to reset the defaults (or				if you don’t want to make the change).
	The autoloader resets and the default configuration settings take effect. The
	LCD displays the Home screen.

44

PRODUCT MANUAL 1012581