Exabyte 1X7 LTO manual Viewing Information on the Home Status, Library Information, Scsi ID

VIEWING INFORMATION ON THE HOME (STATUS) PAGE

VIEWING INFORMATION ON THE HOME (STATUS) PAGE

The Status page is the “home page” for the utility. The Status page provides information in four sections:

Library Information

Library Status

Tape Drive Status

Inventory

At the bottom of the Status page is an Update button that refreshes the information on the page. An option for automatically refreshing the page is also available. Check this option to have the information refreshed approximately every 6 seconds.

The information available on the Status page is described below.

LIBRARY INFORMATION

The Library Information section includes the following information for the autoloader and tape drive:

Field	Indicates the...
Device	library and tape drive
Vendor	vendor identification value (EXABYTE) as reported in
	response to an INQUIRY command from an application
Product	product identification value as reported in response to an
	INQUIRY command from an application:
	ƒ “ LTO 1x7 2U “for the autoloader
	ƒ “Ultrium-TD2” or “Ultrium-TD3” for the tape drive
	Note: If you change the autoloader’s emulation mode
	from its default (Native), the autoloader’s Product
	Identification value changes to match the new
	emulation mode (see page 31).
Serial Number	autoloader or tape drive’s serial number
Firmware Rev	autoloader or tape drive’s current firmware revision level
SCSI ID	autoloader or tape drive’s current SCSI ID. You can change
	the SCSI IDs from the utility’s Configuration page (see
	page 53).

OCTOBER 2006 MAGNUM 1X7 LTO AUTOLOADER

49