Exabyte 1X7 LTO manual Running Diagnostics

RUNNING DIAGNOSTICS

The Statistics page provides the following information:

Field	Indicates the total number of...
Move Count	moves that have taken place in the autoloader. A move is
	when the cartridge loader removes a cartridge from its cell
	and places it in the tape drive or removes a cartridge from
	the tape drive and places it in its cell.
Pick Retry	times the cartridge loader has retried removing a cartridge
Count	from a cell or from the tape drive.
Put Retry	times the cartridge loader has retried placing a cartridge in
Count	a cell or in the tape drive.
Scan Count	times the bar code scanner has scanned a bar code label
Scan Retry	times the bar code scanner has retried scanning a bar code
Count	label
Scan Fail Count	times the bar code scanner failed scanning a bar code label
	The scanner tries to scan a bar code several times before it
	logs a failure.
Drive Load	times the cartridge loader has loaded a cartridge into the
Count	tape drive
Drive Reload	times the cartridge loader has retried loading a cartridge
Count	into the tape drive

RUNNING DIAGNOSTICS

Click on Diagnostics at the top of the page to view the Diagnostics page.

Figure 4-4shows an example of the Diagnostics page.

Figure 4-4Remote Management utility Diagnostics page

The standard test is the same as the diagnostic tests that can be run from the operator panel (see page 77). To run the standard diagnostic test, click on Run Test. When the test is finished, the utility displays the results.

OCTOBER 2006 MAGNUM 1X7 LTO AUTOLOADER

59