Exabyte 1X7 LTO manual Accessing Password Protected Operator Panel Menus

CHAPTER 3—CONFIGURING THE AUTOLOADER

10.Press until the Home screen appears. Press again or wait two minutes without pressing any buttons for the password to take effect.

Note: If you want to continue using menus after you have set a password, do not press the additional time after reaching the Home screen. The password will not take effect until you have pressed an additional time at the Home screen or you have pressed no buttons for two minutes.

When password protection is in effect, you must enter the password before you can use the operator panel menus. Each time you return to the Home screen and press an additional time (or wait two minutes), password protection is re-activated; you must enter the password again to access the menus.

Accessing Password Protected Operator Panel Menus

If you need to gain access to the operator panel menus, but want password protection to remain in effect:

1.	At the Home screen, press					, , , or . The password entry screen
	appears:
			E	n t e r		P a s s w o r d
			>	> >	>	< < < < <
	a. Enter the password you set previously.
	b. Use	or		to move through character positions in the password.
	c. Use	or		to enter or change characters.
	d. Press and hold				or	to move rapidly through the available
	characters.
2.	Press	. You now have access to the operator panel menus.
3.	After you have finished using the menus, press						until the Home screen
	appears. Then, press				again or wait two minutes without pressing any
	buttons for password protection to be reactivated.

Turning Off the Operator Panel Password

To turn off password protection for the operator panel:

1.At the Home screen, press , , , or . The password entry screen appears:

E	n	t e	r	P a s s w o	r d
>	>	> >		<	< <	< <

42

PRODUCT MANUAL 1012581