Exabyte 1X7 LTO manual Assembling the Rails, #2 Phillips screwdriver Level Tape measure

CHAPTER 2—INSTALLING THE AUTOLOADER

To install the library in a rack, you must obtain these tools:

#2 Phillips screwdriver

Level

Tape measure

ASSEMBLING THE RAILS

1.Measure the depth of your rack—Using a tape measure, measure the inside distance from the front mounting holes of your rack to the back mounting holes. See Figure 2-5, distance (E).

2.Position the front and back sections of the left-side rail as shown in Figure 2-3, with the front rail section on top of the back rail section. Spread the sections to the distance you measured in step 1.

3.Assemble the left rail using four M5 screws. Keep the screws loose so that you can adjust the length of the assembled rail, if necessary.

Left-side rails (viewed from front)

Back section

Front section

Front flange

Front

Figure 2-3Assembling the left-side rail

Back

Back flange

Small back flange (attach the library here in final step)

M5 screw (black)

12

PRODUCT MANUAL 1012581