Exabyte 1X7 LTO Attaching the Rails to the Rack, Assemble the right-side rail in the same way

ATTACHING THE RAILS TO THE RACK

4.Assemble the right-side rail in the same way.

Right-side rails (viewed from the back)	Front
	Front
	flange
	Front
Back	section
section
Back	M5 screws
	(black)
flange

Figure 2-4Assembling the right-side rail

ATTACHING THE RAILS TO THE RACK

1.Left side rail assembly—Position the left-side rail assembly in the rack so that the front flange is behind the front screw holes in the rack.

Back of Rack

Rack rail (back)

Depth of rack (E)

M5 screw (A) (black)

Back

Rack rail flange (D) (front)

Level

Front rack	Front flange (C)
screw holes (B)

M5 screw (A) (black)

Front of Rack

Figure 2-5Attaching the left-side rail to the rack

2.Front of rack—Insert an M5 screw (A) through one of the front rack screw holes (B) and engage the pem nut in the rail flange (C). If your rack has square mounting holes or the holes are much larger than the screws provided in the kit, use a washer. Finger-tighten the screw.

OCTOBER 2006 MAGNUM 1X7 LTO AUTOLOADER

13