Exabyte 1X7 LTO manual 118, Autoloader to a new location

CHAPTER 9—SHIPPING THE AUTOLOADER

5.Place the foam pads over the foam cushions, as shown in Figure 9-9.

Figure 9-9Autoloader in shipping box with top foam pads

6.If you are shipping the rail kit with the autoloader, set the rail kit box into the center of the shipping carton on top of the foam pads, as shown in Figure 9-7.

!Important Do not ship the rail kit if you are returning the autoloader for service. Pack the rail kit with the autoloader only if you are sending

the autoloader to a new location.

Figure 9-10Accessory kit in shipping box (do not ship accessory kit if returning autoloader for service)

7.Place any necessary paperwork on top of the autoloader.

8.Close and seal the box.

9.Place the shipping label on the box.

118

PRODUCT MANUAL 1012581