Exabyte 1X7 LTO manual Change Library Configuration

SETTING CONFIGURATION OPTIONS

CHANGE LIBRARY CONFIGURATION

In the Change Library Configuration section, you can change the following settings:

Field	Description
Library SCSI ID	You can change the SCSI IDs for the autoloader or tape
and Drive 1	drive if they conflict with other devices on the SCSI bus. See
SCSI ID	page 29 for more information about SCSI IDs.
New Control	The default robot control mode for the autoloader is
Mode	Random. When operating in Random mode, the
	autoloader processes cartridges according to commands
	issued by an application. If you want the autoloader to
	process cartridges sequentially, without instructions from an
	application, you can set the control mode to Sequential. If
	you select Sequential mode, set the Loop and Restart
	options as desired. See page 38 for information about
	Sequential mode and the Loop and Restart options.
New Front	If desired, you can use the Remote Management utility to
Panel Access	change the password that protects access to the
Password,	autoloader’s menus from the front panel. (See page 40 for
Confirm New	more information about password protecting the front
Access	panel menus.)
Password,	To set or change this password, enter a new password in the
Current Access	New Front Panel Access Password field. The password can
Password	be from 1 to 6 characters and can include spaces. The
	password is not case-sensitive. Re-enter the new password
	in the Confirm New Access Password field. If you are
	changing an existing password, enter the current password
	in the Current Access Password Field.
	To cancel an existing password, enter the current password
	in the Current Access Password Field and leave the New
	Front Panel Access Password and Confirm New Access
	Password fields blank.
	Note: The front panel access password is separate from
	the web access password that prevents using the
	Remote Management utility to make changes to
	the autoloader’s configuration (see page 58).
	This password is separate from the web access
	password that prevents using the Remote
	Management utility to make changes to the
	autoloader’s configuration (see page 58).

OCTOBER 2006 MAGNUM 1X7 LTO AUTOLOADER

55