Exabyte 1X7 LTO manual Setting Ethernet Configuration Options

SETTING CONFIGURATION OPTIONS

9.Press (as needed) to return to the Home screen.

SETTING ETHERNET CONFIGURATION OPTIONS

Table 3-5Ethernet configuration options

Remote	The Remote Management utility allows you to connect to the
Management	autoloader’s Ethernet interface to remotely monitor operations,
Utility	upgrade firmware, and create diagnostic listings. See:
	ƒ Connecting the library to Ethernet—page 18
	ƒ Using the Remote Management utility—Chapter 4
Ethernet	Configuring the autoloader’s Ethernet interface typically
	involves specifying the library’s IP address, subnet mask, and
	gateway address.
	ƒ IP address—Used to route information from the autoloader to
		the server. You can choose between dynamic
		(server-assigned) or static (user-assigned) addressing for the IP
		address.
	ƒ	Subnet Mask—Used to route information to designated
		devices within the network.
	ƒ	Gateway address—Allows information to be routed outside
		the subnet.
Network	This allows you to select the method used to set the Internet
Addresses	Protocol (IP) address for the library, as follows:
	ƒ	Static—The library uses a fixed IP Address, which is assigned
		in the IP Address option.
	ƒ	DHCP—The library uses an IP address assigned by the
		network DHCP (Dynamic Host Configuration Protocol)
		server.

OCTOBER 2006 MAGNUM 1X7 LTO AUTOLOADER

35