Exabyte 1X7 LTO Field Description Snmp Read, Snmp Write, Broadcast, Snmp Trap, Trap Port FTP User

		SETTING CONFIGURATION OPTIONS
Field	Description
SNMP Read	If you need to identify the autoloader’s SNMP settings to an
Password,	application, you can view the settings and change them, if
SNMP Write	desired. The default values are:
Password,	ƒ SNMP Read Password: public
SNMP	ƒ SNMP Write Password: private
Broadcast
	ƒ SNMP Broadcast Password: private-traps
Password,
	ƒ SNMP Trap Address: 0.0.0.0
SNMP Trap
Address, SNMP	ƒ SNMP Trap Port: 162
Trap Port	Note: The passwords are case-sensitive.
FTP User	If you plan to use the autoloader’s FTP interface to upgrade
Name, FTP	firmware or obtain diagnostic listings, you can view the
User Password	default FTP user name and password and change them, if
	desired. The default values are:
	ƒ	User name: anonymous
	ƒ	Password: Exabyte
	Note: The user name and password are case-sensitive.
E-Mail Server	If desired, you can receive e-mail alerts from the autoloader
Address, E-Mail	in the event of error conditions or exceptions. If you want
User Name,	to receive these e-mail alerts, enter the IP address of your
E-Mail Address,	e-mail server, your e-mail user name, and your e-mail
E-Mail Sender	address. You can also enter a sender e-mail address that will
	appear in the “From” field of messages sent from the
	autoloader. This address can be anything you like, but be
	aware that some e-mail servers have limitations on the type
	of address you can specify.
Web Access	If you have set up a password for changing options on the
Password	Configuration page (see the following section), enter the
	password here before you click on the Update button to
	enact the changes.
	Note: If you forget your web access password, click on
		Get Web PW Hint at the bottom of the
		Configuration page. You will see an encrypted
		version of your password. Contact Exabyte
		Technical Support at one of the phone numbers
		provided to have your password decrypted.

OCTOBER 2006 MAGNUM 1X7 LTO AUTOLOADER

57