Exabyte 1X7 LTO manual After changing the emulation mode, reboot your host

CHAPTER 3—CONFIGURING THE AUTOLOADER

2.Press or until the Configuration menu appears:

C	h	a	n g e	a
C	o	n	f i g	u r a t i o n

3.	Press	to see the menu selections.
4.	Press	or		until the following screen appears:
			C	h a n g e		E m u l a t i o n
			N	o w	i n	N a t i v e
5.	Press	to display the emulation mode selection screen:
			S	e l e c t		E m u l a t i o n
			x	x x	x x x
6.	Press	or		to scroll through the available modes until the one you want
	appears.
7.	Press	to select the new value. A confirmation message appears:
			S	e t	E m u l		a t i o n	t o
			x	x x	x x x	n	o w ?
8.	Press	to enact the change (or					if you don’t want to make the change).
9.	Press	(as needed) to return to the Home screen.
!	Important			After changing the emulation mode, reboot your host
				computer so that it recognizes the new emulation mode.

SETTING UP AUTOMATIC TAPE DRIVE CLEANING

The Autoclean option enables the autoloader to automatically perform tape drive cleaning without operator intervention. When Autoclean is enabled, the autoloader monitors the cleaning requirements of the tape drive. When the drive indicates it needs cleaning, the autoloader loads the cleaning cartridge into the tape drive. After the cleaning cycle is complete, the tape drive unloads and ejects the cleaning cartridge, and the autoloader resumes operation.

32

PRODUCT MANUAL 1012581