Exabyte 1X7 LTO manual Library Status, Lcd, On/Off

CHAPTER 4—USING THE REMOTE MANAGEMENT UTILITY

LIBRARY STATUS

The Library Status section includes the following information:

Field	Indicates...
LCD	the current message displayed on the autoloader’s LCD
Motion	the type of motion currently being performed by the
	cartridge loader
Robot Control	the current operating mode for the autoloader (Random or
Mode	Sequential)
	See page 38 for information about operating modes. You
	can change the robot control mode from the utility’s
	Configuration page (see page 53).
Door	the current reading of the door sensor for the cartridge
Open/Closed	access port door: Door Open or Door Closed
Sensor
Library	whether the autoloader’s current internal temperature is
Temperature	within the normal operating range. See page 123 for
	operating temperature requirements.
Front Door	whether or not the cartridge access port is locked by an
Locked or Not	application. (For security purposes, an application can issue
Locked by Host	a PREVENT MEDIUM REMOVAL command to the
	autoloader to disable the cartridge access port.)
Language	the current language used on the autoloader’s LCD
	You can change the LCD language from the utility’s
	Configuration page (see page 53).
Auto Clean	whether the autoloader is set to perform clean the tape
ON/OFF	drive automatically when required
	See page 32 for information about the Autoclean option.
	You can change the Autoclean option from the utility’s
	Configuration page (see page 53).
Cleaning Tape	whether cell 7 in the autoloader has been designated as the
Installed/No	storage location for a cleaning cartridge
Cleaning Tape	See page 32 for information about enabling the cleaning
Installed	cartridge cell. You can enable the cleaning cartridge cell
	from the utility’s Configuration page (see page 53).

50

PRODUCT MANUAL 1012581