Exabyte 1X7 LTO manual 114, Removing the Autoloader from the Rack, Autoloader for service

CHAPTER 9—SHIPPING THE AUTOLOADER

REMOVING THE AUTOLOADER FROM THE RACK

If the autoloader is installed in a rack, remove it as described below.

! Important	Do not ship the rack-mounting hardware if you are returning the
	autoloader for service.

1.From the back of the rack, use a #1 Phillips screwdriver to remove the two screws that secure the autoloader to the rails (see Figure 9-1). Save the screws.

Remove this screw (one each side)

Figure 9-1Removing the screws securing the autoloader to the rails

2.From the front of the rack, slide the autoloader forward and out of the rack (see Figure 9-2).

Figure 9-2Removing the autoloader from the rack

114

PRODUCT MANUAL 1012581