System Tab

Setting a System Password

Setting a system password protects your gateway settings from being modified or changed by someone who has not been given permission to do so. After setting a system password, you will be required to enter it whenever you attempt to access a gateway configuration page — for example, if you try to change the gateway’s broadband connection settings or upgrade the gateway software. If a password has not been set, a reminder notice is displayed when you attempt to access pages where settings can be changed.

To set your system password:

Open a Web browser and access the gateway user interface by entering http://gateway.2wire.net.

Click the System tab.

Click the System Password link in the System area of the Network at a Glance panel to open the Edit System Password page.

Figure 3. Edit System Password Page

1.In the Settings panel, click the Enable checkbox.

2.In the Enter New Password field, enter your password.

3.In the Confirm New Password field, re-enter your password.

6

Page 11
Image 11
2Wire None manual Setting a System Password, Edit System Password