2Wire None manual

Management and Diagnostic Console

The Edit VoIP Settings panel displays the current SIP settings, and allows you to edit the settings. The following table describes the fields.

Server

IP Address	Corresponds to the SIP proxy address.
Port	Corresponds to the SIP proxy destination port.
Number of Lines	Displays the number of lines allowed on the gateway.
End Point
Domain	Displays the IP domain of the SIP endpoint.
Register Expire Time	Displays the default expiration (in seconds) of the SIP
	registration, and indicates how frequently re-registration will
	occur.
Register Retry Interval	Indicates the period of time (in seconds) before the gateway will
	retry registration after a failed attempt.

By default, the Show CID Names and Require Authentication checkboxes are checked. Show CID Names allows the gateway to display the configured outbound caller ID information. Require Authentication allows the gateway to use authentication when registering with the SIP proxy. Use 11-digit DIDs allows the gateway to automatically append a “1” to the registration phone number.

1.To add a new profile, choose the VoIP type from the pull-down menu and click ADD. To edit VoIP settings, click the box next to the profile name and click EDIT. To delete a profile, click the box next to the profile and click DELETE.

2.If editing a profile, the Edit Profile Settings page opens.

3.Enter a name in the Profile Name field, then enter values in the Server Settings fields as well as the fields for End Point Settings. Check the appropriate boxes for 11-digit DIDs, CID names, and authentication.

4.Click SUBMIT.

93