| Management and Diagnostic Console |
Item | Description |
Current Status | The current operating condition of the broadband link. |
| Fully operational. The broadband link is operational |
| (including connection to ISP and other services). |
| Initializing. The broadband link is preparing to connect. |
| Establishing link. The broadband link is connecting. |
| No physical link signal. No physical signal detected on the |
| broadband link. |
| Physical connection. The broadband link is connected. |
| Error. There is a broadband link error. |
DSL Connection Details (for DSL models only)
DSL Line (Wire Pair) | Line 1 (inner pair), Line 2 (outer pair), or Searching for DSL |
| signal. During installation, the 2Wire gateway auto detects |
| whether the DSL signal is on line 1 or line 2. |
Protocol | G.dmt, G.lite, or ANSI (T1.413). |
DSL Channel | Fast or Interleaved. |
DSLAM | DSLAM vendor identification. For G.dmt or G.lite protocol, |
| values are Country, Vendor, and Specific. For ANSI (T1.413) |
| protocol, values are ID, Rev (Revision), and Std (Standard). |
ATM PVC Info | The ATM VPI/VCI. |
ATM Encapsulation | LLC or VCMux. |
ISP Details |
|
Connection Type | The method by which the 2Wire gateway connects to the ISP: |
| Direct_IP, PPPoA, or PPPoE. For the HomePortal 1000, direct |
| uses an RFC2684 (formerly RFC 1483) bridged Ethernet |
| connection without FCS |
User Name | The 2Wire gateway user name. |
PPPoE Access Concentrator | This field is present only when the connection type is PPPoE. |
PPPoE Service | The type of PPPoE services being used. This field is present |
| only when the connection type is PPPoE. |
IP Address Range | The broadband address of the 2Wire gateway. |
Subnet Mask | The subnet mask to be used by the 2Wire gateway on the |
| broadband link. |
Gateway | The IP address of the default gateway (default router) that |
| the 2Wire gateway connects to on the broadband link. |
65
