
| Management and Diagnostic Console |
Item | Description |
Max 2 | Latest estimate of maximum achievable rate adjusted for changing line conditions. |
Max 3 | Current or final estimated maximum achievable rate without impulse noise |
| compensation. |
Mgn 1 | Noise margin (in dB) at the start of the connection. |
Mgn 2 | Latest noise margin adjusted for changing line conditions since the connection was |
| first established. |
Attn | Measured attenuation (in dB) of the line. |
Pwr | Transmit power (in dB). |
CRCs | Total uncorrected errors for this connection. |
FECs | Total corrected errors for this connection. |
INP | Impulse noise protection. |
DLY | Delay of latency path. |
Upstream |
|
Rate | The new user data rate (in kbps) for the connection. |
Max | Maximum rate achievable at the time of the initial connection based on the line |
| quality (specifically, the uncapped rate). |
Mgn | Noise margin (in dB) at the start of the connection. |
Attn | Measured attenuation (in dB) of the line. |
Pwr | Transmit power (in dB). |
CRCs | Total uncorrected errors for this connection. |
FECs | Total corrected errors for this connection. |
Mode | The DSL mode used (G.DMT, T1.413, or G.LITE). |
Vendor | Vendor ID of the DSLAM (for example, ALCB indicates Alcatel DSLAM in G.DMT |
| mode). |
State | The internal state of the modem. If there are repeated connection problems, |
| technical support representatives can use this information to determine at what |
| point during training the modem failed, or whether the modem is repeatedly failing |
| at the same point. |
99