Management and Diagnostic Console

This chapter describes the 2Wire gateway Management and Diagnostic Console (MDC). The Management and Diagnostic Console provides information about the status of the 2Wire gateway, its broadband network connections, attached home networking devices, system and security information, and a running log of any error conditions.

You can use the tools provided to:

View configuration and service provisioning information.

View operation logs.

Perform diagnostic tests.

Configure the gateway.

The following sections describe how to access the Management and Diagnostic Console, use the diagnostic and configuration tools, and modify settings.

Note: The MDC pages available are dependent on the 2Wire gateway software release. The MDC pages shown in this chapter are for 2Wire gateways running software release 4.21.x If your gateway is running a software release earlier than 4.21.x, some of these pages may not be available.

Accessing the MDC

To access the MDC from your in-home or office network, enter the following URL: http://gateway.2wire.net/management

Using the MDC

After you access the Management and Diagnostic Console, a navigation bar allows you to quickly select pages on the site. The navigation bar consists of the following links:

Group

Link

Summary

System Summary

Broadband Link

Summary

 

Statistics

 

Detailed Statistics

 

Configure

Local Network

Status

 

Statistics

58

Page 63
Image 63
2Wire None manual Accessing the MDC, Using the MDC