
Management and Diagnostic Console
The following table shows the possible nodes that can display on the Link Manager States page.
Node | Description |
root0 | Root for configuration tree. |
global0 | Branch for all global configuration modules. |
device0 | Maintains the status and configuration for devices on the 2Wire gateway. |
rnat0 | Maintains the application mappings and pinholes for nodes on the 2Wire gateway. |
route0 | Maintains all static routes on the 2Wire gateway. |
fw0 | Maintains all firewall rules on the 2Wire gateway. |
cms0 | Monitors CMS connectivity and activity with the 2Wire gateway. |
home0 | Branch for the home network modules. |
vlan0 | Home network virtual LAN configuration module. |
ipnet1 | Home network IP configuration module. |
vlanmon0 | Home network virtual LAN monitor for activity. |
ipbridge0 | Home network IP bridge/DMZ configuration module. |
ipnet2 | Home network public IP network configuration module. |
vlan3 | Home network voice virtual LAN module. |
bband0 | Branch for the primary broadband network. |
vlan1 | Primary broadband virtual LAN configuration module. |
dhcp0 | Primary broadband DHCP client module. |
ipnet0 | Primary broadband IP configuration module. |
dnstest0 | Primary broadband DNS access test module. |
vlan2 | Primary broadband PPP bridge virtual LAN. |
dsl0 | DSL device control module. |
apvc0 | Primary broadband ATM and auto PVC search module. |
pppoe0 | Primary broadband PPPoE configuration module. |
pppoa0 | Primary broadband PPPoA configuration module. |
rtatm0 | Primary broadband routed ATM configuration module. |
The nodes that display are dependent on the 2Wire gateway. For example, 2Wire gateways that are not connected to the Internet via ADSL will not display ADSL information.