VoIP Network Tab
9.Congratulations, setup is complete. Click DONE to return to the Voice Network summary page. If you want to change your settings, go to the System Summary page, then click the Voice Network tab.
Note: To make any broadband connection settings changes, such as configuring the voice servers, refer to the Management and Diagnostic Console. See “Management and Diagnostic Console” on page 58.
Once the VoIP server configuration settings have been implemented, open a browser and enter http:// gateway.2wire.net. Click the Voice Network tab. The View Voice Network page displays. You can view the status of your VoIP line(s) in the Status at a Glance section.
Note: To comply with Australian standards, local ports shall not be connected via shared building cabling.
38
