2Wire None manual Reviewing Training History

		Management and Diagnostic Console
Item	Description	Value	Comment
Impulse Noise	Indicates the number of	The ideal value is	Ok or Suspicious -
Comp. Tones	compensation tones on which	zero (0).	Impulse noise detected.
	impulse noise is detected. For
	non-interleaved lines with
	impulse noise, the connect
	rate will be lowered to avoid
	excessive errors on the line;
	however, impulse noise may
	vary with time, so connect
	rates may vary accordingly.
	Impulse Noise Compensation
	is currently disabled for
	interleaved lines.
Excessive	Indicates to what degree	The ideal value is
Impulse Noise	impulse noise is present on	zero (0).
	the line.
Impulse noise	Measurement of how much
protection	impulse noise can be
	mitigated. Dependent on the
	current line configuration.
Delay of latency	Measurement of how much
path	delay is introduced.
	Dependent on the current line
	configuration.

Reviewing Training History

The Training History pane provides a record of the last 20 connection attempts. The current connection or connection attempt is displayed in the last row.

Item	Description
Time	Initially this field will display the time (since power on) in DAYS HH:MM:SS format,
	until the gateway can access the Internet and retrieve the current local time.
	Subsequently the time (since power on) is displayed in YY:MM:DD and HH:MM:SS
	format.
Line	The line (1 or 2) on which the gateway is searching for a DSL signal.
Downstream
Rate	The net user data rate (in kbps) for the connection.
Max 1	Maximum rate achievable at the time of the initial connection based on the line
	quality (specifically, the uncapped rate).

98