2Wire None Public Routed Subinterface Settings, Public Proxied Subnet Settings, Display Settings

Management and Diagnostic Console

Note: If you change the local network IP address range, you must renew the DHCP lease on all devices on the gateway’s local network and manually reconfigure all devices configured with static IP addresses.

Public Routed Subinterface Settings

The Public Routed Subinterface pane allows you to create a local network that has broadband network- accessible IP addresses by creating a route from the Internet to the public network specified. The public network operates without the use of Network Address Translation (NAT). This feature is typically used in conjunction with broadband service that provides a range of available IP addresses. Once enabled, the public IP addresses can be assigned to local computers.

Public Proxied Subnet Settings

The Public Proxied Subnet pane allows you to create a local network that has broadband-accessible IP addresses. Public Proxied Subnet is a public network in which the local network is an extension of the broadband network and does not require any special routing. Computers that are assigned Public Proxied Subnet IP addresses operate without the use of Network Address Translation (NAT). This feature is typically used in conjunction with broadband service that provides a range of IP addresses. Once enabled, the Public Proxied Subnet IP addresses can be assigned to local computers.

Display Settings

If the Show Inactive Devices checkbox is checked, devices that are no longer on the local network will display in the Local Network Local Devices list as an inactive device. If this checkbox is not checked, inactive devices will not be displayed in the device list.

Enable Router Behind Router Alert

If the Display alert when another router is connected to this router checkbox is checked, the Router Behind Router error page displays in the gateway user interface if the gateway detects the presence of a third-party router. If a third-party router is connected to the 2Wire gateway, the network can become unstable because both devices are trying to manage private IPs via NAT.

83