Firewall Tab
Enabling Advanced Security
Your 2Wire gateway firewall already provides a high level of security. You can configure the firewall to provide advanced security features, including stealth mode, strict UDP, or block pings.
Stealth Mode
In normal firewall operation, when an unknown remote device makes a request to connect to a user’s network the firewall does not allow the connection to be made and responds with a “connection not available” message. This may not discourage a determined hacker, because the message confirms that there is an active network sending the response. The hacker may then use more sophisticated tools in an attempt to access your network.
When in stealth mode, the 2Wire gateway firewall does not return any information in response to network queries; that is, it will appear to the hacker who is trying to access your network that your network does not exist. This discourages hackers from further attempts at accessing your network, because to them it will appear as though there is no active network to access.
To enable Stealth Mode:
•Open a Web browser and access the 2Wire gateway user interface by entering http://gateway.2wire.net.
•Click the Firewall tab.
51
