Generac Power Systems 16 kW NG, 10 kW LP, 13 kW NG, 7 kW NG, 9 kW NG, 8 kW LP, 17 kW LP manual Section

Disassembly

Part 6

Section 6.1

Major Disassembly

Figure 16.

13.Unbolt Oil Cooler: Using a 10mm socket remove the two 10mm bolts from the front of the oil cooler. See Figure 17. Remove the two 10mm bolts from the rear of the oil cooler. See Figure 18.

Figure 14.

12.Remove Air Box: Using a 6mm allen wrench remove the four intake manifold socket head cap screws. See Figure

15.Using a 4mm allen wrench, remove the four airbox allen head shoulder bolts. While removing the airbox remove the four rubber washers. See Figure 16.

Figure 15.

Figure 17.

Figure 18.

Page 155