![](/images/new-backgrounds/1187923/187923213x1.webp)
13
Dolphin QuadCharger
The Dolphin QuadCharger provides intelligent battery management for NiMH (Nickel Metal Hydride) Dolphin 7400/7450 battery packs.
This device fully charges as many as four NiMH batteries in 2.5 hours. Charging slots work independently to control charging and discharging of individual battery packs. The QuadCharger is compatible with all models in the Dolphin® 7400/7450 family of hand held computers.
As battery packs charge, the charging circuitry follows a
The QuadCharger conditions and calibrates batteries for longer, more consistent performance.
Dolphin QuadCharger Parts and Function
Top Panel
Power Switch & | Condition Switch & Status LEDs |
Power LED | Condition LED |
Status LEDs | Charging Pocket |
Charging Pocket
The QuadCharger has four charging pockets for charging and/or conditioning batteries for Dolphin 7400/7450 terminals.
Power Switch
Press and hold the Power Switch for approximately one second, then release, to turn on the QuadCharger. The Power Switch LED is green when the unit is on. To turn the charger off, press and hold the Power Switch for about two seconds and then release. This feature prevents the unit from being accidently turned off during use or on when not in use.
Condition Switch
Press the Condition Switch to start a battery conditioning cycle. The orange Condition Switch LED flashes during the conditioning cycle.
Status LEDs
A Status LED is located above each of the four battery pockets.
13 - 1