![](/images/new-backgrounds/1187923/187923205x1.webp)
1.Plug in the power supply and connect it to the back of the USB HomeBase.
2.Plug the USB cable into the back of the USB home base.
3.Plug the other end of the USB cable into your PC.
At this point, a dialog box appears on your PC instructing you that the system has detected new hardware and it is searching for the HHP
In the "Locate Drive Files" dialog, check the
•w2k - Windows® 2000
•win98 - Windows® 98
•winme - Windows® Me
At this point, the hardware is installed and operating. You may need to reset your PC to complete the installation process. You can verify that the USB driver is functioning by watching the COMM LED on the USB home base. It should be flashing red approximately every three seconds.
Once the USB HomeBase is installed, you can use ActiveSync to connect to a Dolphin 7400. These instructions assume that ActiveSync v3.1 is installed on your PC.
12 - 11