IT5600/IT5800
◆Pins 4 and 9 are populated depending on power supply voltage option.
LaserOutput | Standard |
User’s Guide
connects to your terminal
9 Pin Type D Female
Start of scan 1 
Digital bar code data output 2 Turn on good read LED or beeper 3 ◆ N/C 4
Trigger signal to decoder 5
6Laser enable
7Supply ground
8Cord shield
9 5 Volt power connection ◆
Only (Laser | Cable Pinouts |
Compatible |
|
connects to the scanner handle
10 Pin Modular Plug
1Turn on good read or LED beeper
2Trigger signal to decoder
3Laser enable
4Supply ground
5
6Digital bar code data output
7Supply input power (Refer to tables on page
9Start of scan
Bar Image) |
12 - 5
Conventional laser data format is provided at the modular connector in the scanner handle. The interface cable is terminated with a 10 pin modular plug, and a 9 pin Type D (squeeze to release) connector that is compatible with all Hand Held Products terminals.
