Hand Held Products IT5600, IT5800 Output Sequence Editor Require Output Sequence, Output Sequence Example

IT5600/IT5800 User’s Guide 3 - 11
Output Sequence Editor
Require Output Sequence
When an output sequence is Required , all output data must conform to an edited
sequence or the scanner will not transmit the output data to the host device.
When it’s
On/Not Required , the scanner will attempt to get the output data to
conform to an edited sequence, but if it cannot, the scanner transmits all output
data to the host device as is.
When the output sequence is
Off , the bar code data is output to the host as the
scanner decodes it.
Note: This selection is unavailable when the Multiple Symbols Selection is
turned on.
Output Sequence Example
In this example, you are scanning Code 93, Code 128, and Code 39 bar codes,
but you want the scanner to output Code 39 1st, Code 128 2nd, and Code 93
3rd, as shown below.
Enter Sequence
Default Sequence
Required
On/Not Required
* Off