Homelite HL-1450, HL-P2500, HL-1660E, HL-2400CE, HL-1050, HL-1250, HL-1470N, HL-1070 Color Palettes

10/10/03

CONTENTS

1.	INTRODUCTION		3
2.	COLOR MODES		4
	2.1. Using Simple Color Mode - Set Simple Color		4
	2.2.	Using PCL Color Mode - Set PCL Color Setting	5
	2.3.	Using HP-GL/2 Color Mode	9

3. COLOR PALETTES		10
3.1.	Set Color #1	10
3.2.	Set Color #2	10
3.3.	Set Color #3	10
3.4. Set Color to Palette		10
3.5.	Select Color	10
3.6.	Push/Pop Palette	11

4. COLOR GRAPHICS		12
4.1.	Start Raster Transfer	12
4.2. Set Destination Raster Width		12
4.3. Set Destination Raster Height		12
4.4.	Set Scale Algorithm	13
4.5. Send Raster Data by Plane		13
4.6.	Enter HP-GL/2 Mode	13

5. ENHANCE OUTPUT		14
5.1.	Set Render Algorithm	14
5.2.	Set Monochrome Mode	14
5.3.	Set Gamma Correction	15
5.4.	Download Dither Matrix	15
5.5.	User-defined Pattern Command	15

6.	HP-GL/2	16
	6.1. IN (Initialize Set Instruction) Command	16
	6.2. PC (Pen Color) Command	16
	6.3. NP (Number of Pens) Command	17
	6.4. CR (Color Range) Command	17
7.	INDEX	18

CHAPTER 3 "PCL5C" - 2