Manuals / Homelite / Computer Equipment / Printer

Homelite HL-1250, HL-P2500, HL-1660E, HL-2400CE, HL-1450, 2060 Command Group Command Description

Models: HL-1250 HL-1270N HL-1470N 2400C HL-1050 HL-P2500 2060 HL-1660E HL-1070 HL-1450 HL-2400CE

1 431

Download 431 pages 8 Kb

Page 203

10/10/03

3.COMMAND GROUP

Command Group	Command	Command Description
Kernel Commands	UEL	Exits current printer language and returns control
		to PJL.
	EXECUTE	Orders the printer to execute the specified
		operation.
	SUPERUSER	Moves to the SUPERUSER mode.
	SUPERUSEROFF	Exit from the SUPERUSER mode.
	WNVRAM	Write the specified data to the specified address
		of the printer’s NVRAM.
	RNVRAM	Retrieve the data from the specified address of the
		printer’s NVRAM.
	COMMENT	Comments can be placed in the command line
	ENTER	Selects a printer language
Job Separation	JOB	Informs printer of job start
Commands
	EOJ	Informs printer of job end
Environment	DEFAULT	Sets default value
Commands
	SET	Sets an environment value which is available
		during a PJL job
	INITIALIZE	Resets the current and default PJL variables to
		factory values
	RESET	Resets current PJL variables to default values
Status Readback	INQUIRE	Requests the current value for a specified
Commands		environment
	DINQUIRE	Requests the default value for a specified
		environment
	ECHO	Returns the <words> to the host computer
	INFO	Requests a specified category.
	USTATUS	Allows the printer to send unsolicited status
		information
	USTATUSOFF	Stops the printer sending all unsolicited status
		information
Device Attendance	RDYMSG	Replaces the READY message on the control
Commands		panel
	OPMSG	Displays altered message on the control panel and
		takes the printer off-line
	STMSG	Displays altered message on the control panel and
		takes the printer off-line. If status readback is
		enabled, returns name of the key.

CHAPTER 5 PJL - 9

Image 203

Homelite HL-1250, HL-P2500, HL-1660E, HL-2400CE, HL-1450, HL-1050, HL-1470N, HL-1070, 2060 Command Group Command Description

Contents

Ver. C Revised for Addition of HL-2400Ce/3400CNVer. B Revised for Addition of HL-1650/1670N/3260N/2460Page Table of Contents HP-GL Graphics Language Control code Glossary Control panel reset Font Graphics mode initial settings LSB RAM ROM Tiff Page Chapter Introduction About the Manual About the Manual Programming Using Word Processing Packages and SpreadsheetsAreas of USE Graphics Font Development Introduction Chapter PCL Contents Using Fonts Using Graphics Macros Index Environments Job Control Command List Using graphics Status Readback Introduction Control Codes Controlling the Printer Esc&s1C 27381154967 1Bh26h73h31h43h Escape SequencesEsc&k#G 2738107#71 1Bh26h6Bh#47h Esc&s0C 27381154867 1Bh26h73h30h43h EscZ 2790 1B5A Display functions modeEscY 2789 1B59 Modified print environment Factory default environmentUser default environment Environments Postcard JOB ControlSize Esc&l#A 2738108#65 1Bh26h6Ch#41h Esc&l#G 2738108#71 1Bh26h6Ch#47h Output tray Esc&l#H 2738108#72 1Bh26h6Ch#48h Paper source Esc&l#U 2738108#85 1Bh26h6Ch#55h Left long-edge offset registration Esc&a#G 273897#71 1Bh26h61h#47h Esc&l#Z 2738108#90 1Bh26h6Ch#5AhEsc&l#S 2738108#83 1Bh26h6Ch#53h EscCR!#R Esc&l1T 27381084984 1Bh26h6Ch31h54hEscE 2769 EscCRFD EscCRI 271373 1Bh0Dh49h EscCRGLEscCRAB 27136566 1Bh0Dh41h42h EscCRAI 27136573 1Bh0Dh41h49h Text area PhysicalPrintable area Logical Portrait page dimensions 3150 2175 3030 3507 2480 3389 2952 2078 2834 Landscape page dimensions3300 2550 3180 150 4200 2550 4080 150 Esc&a#M 273897#77 Esc&u#D 2738117#68 1Bh26h75h#44hEsc&a#L 273897#76 Esc&l#E 2738108#69 1Bh26h6Ch#45h Resetting the horizontal marginsSetting the top margin Esc9 2739 1Bh39h Sample file Setting the vertical motion index VMISetting the horizontal motion index HMI Esc&l#C 2738108#67 1Bh26h6Ch#43h Esc&l#F 2738108#70 1Bh26h6Ch#46h Setting line spacingEsc&l#D 2738108#68 1Bh26h6Ch#44h Text length Esc&l#L 2738108#76 1Bh26h6Ch#4Ch LengthEsc&l#P 2738108#80 1Bh26h6Ch#50h Perforation skip Esc&a#V 273897#86 Esc&a#R 273897#82Esc*p#Y 2742112#89 1Bh2Ah70h#79h Esc*p#X 2742112#88 1Bh2Ah70h#58h Horizontal position Horizontal cursor positioning columnsEsc&a#C 273897#67 Horizontal cursor positioning units Esc&a#H 273897#72 Positioning the cursor using control codesUsing the cursor position stack Horizontal cursor positioning decipoints Esc&a#P 273897#80 Esc= 2761 1Bh3DhEsc&l#O 2738108#79 1Bh26h6Ch#4Fh Lprint Brother Introduction Using Fonts Bound fonts Microsoft Windows 3.1 TrueType Compatible FontsBR-Script Fonts Brother Original Fonts Esc3@ Type of character spacing Symbol setSymbol collections Criteria for font selection Typeface Stroke weight Escf#Wdata 2749102#87 Font Selection CommandsEsc*c#R 274299#82 Bit Value Designated Use Character Requirements for MSL Symbol indexCharacter Requirements for Unicode Symbol index Escsymbol set ID 2740 Symbol map Array of UISymbol set control command Selecting the symbol set Escs#C 2741115#67 1Bh29h73h#43h Escsymbol set ID 2741Symbol Set Set primary font Symbol set Escs#C 2740115#67 1Bh28h73h#43h Escs#H 2741115#72 1Bh29h73h#48h Escs#P 2740115#80 1Bh28h73h#50hEscs#P 2741115#80 1Bh29h73h#50h Escs#H 2740115#72 1Bh28h73h#48h EscCR!#V 271333#86 1Bh0Dh21h#56h Escs#V 2740115#86 1Bh28h73h#56hEscs#V 2741115#86 1Bh29h73h#56h EscCR!#H 271333#72 1Bh0Dh21h#48h Escs#T 2741115#84 1Bh29h73h#54h Escs#B 2740115#66 1Bh28h73h#42hEscs#B 2741115#66 1Bh29h73h#42h Escs#T 2740115#84 1Bh28h73h#54h OCR-B Typeface Set primary Set secondary HL-1050/1250Font OCR-A Esc&d@ Transparent print dataEsc&p#X character codes 2738112#88 1Bh26h70h#58h Esc&d#D 2738100#68 Esc#X 2740#88 1Bh28h#58h Downloadable font manipulationEsc&*c#D 27384299#68 Esc*c#F 27384299#70 Escs#W font descriptor data 2740115#58 1Bh28h73h#88h Creating Downloadable FontsDownloading Sending the font descriptor Special Bitmap font Bitmap font Intellifont Scalable Bound font Intellifont Scalable Unbound font Byte 15 MSB LSB Value Structure Value PostureUpright Italic Alternate Italic Reserved Value Width 600 dpi Symbol set name Symbol set ID Symbol set nameOCR a OCR B OCR M Value Width type Value Stroke Weight Value Vendor Bit Field Designated Use MSL Symbol Index MSL Symbol Index Character Complement bits Unicode Symbol Index If font is compatible with 7-bit Ascii otherwise set to Unicode symbol index character complement bits Sending a character descriptor and data Sending a character code Byte Data Bitmap continuation data Byte 0-1 DataIntellifont scalable font data Compound character data of Intellifont scalable font Intellifont-scalable contour dataContinuation data for Intellifont scalable contour data TrueType character descriptor Byte Data TrueType scalable font PCL Landscape character Set source transparency Using GraphicsSource, Pattern and Destination For example Esc*v#O 2742118#79 Set pattern transparency Esc*c#G 274299#71 Set area fill identity Set pattern reference point User-defined pattern commandEsc*c#W data 274299#87 For 300 dpi Esc*v#T 2742118#84 User-defined pattern controlEsc*c#Q 274299#81 Set pattern type REM --- Background Pattern example Plotting Rectangles Next Gray REM --- Draw a Pattern Using 8 Gray Scales EscCRRM 1Bh0Dh52h4Dh Raster GraphicsEscCRRO 1Bh0Dh52h4Fh EscCRRL 1Bh0Dh52h4Ch Esc*b#M 274298#77 Esc*r#T 2742114#84 1Bh2Ah72h#54hEsc*r#S 2742114#83 1Bh2Ah72h#53h Esc*b#Y 274298#89 Tiff # = 5 indicates that adaptive compression is to be used Optional offset count byte = File Length Ccitt G3 & G4 APTOFF Esc*rB 274211466 1Bh2Ah72h42h Esc*r#A 2742114#65 1Bh2Ah72h#41hEsc*b#Wdata 274298#87 1Bh2Ah62h#57h Esc*b#Cimage data 274298#67 1Bh2Ah62h#43h REM --- Transfer Raster Graphics Raster graphics example ESC*b##W Block 1 Block 2 Block Horizontal 1200-dpi image format mode Raster Graphic Mode Number of repeats Esc%#B 2737#66 1Bh25h#42h Enter HP-GL/2 modeVector Graphics Picture Frame Purpose of a Macro Macros Esc&f1X 27381024988 1Bh26h66h31h58h Defining a MacroEsc&f#Y 2738102#89 1Bh26h66h#59h Esc&f0X 27381024888 1Bh26h66h30h58h Esc&f4X 27381025288 1Bh26h66h34h58h Running a MacroEsc&f2X 27381025088 1Bh26h66h32h58h Esc&f3X 27381025188 1Bh26h66h33h58h Handling Macros EscCR!#E 271333#69 AppleTalk configurationExecute data Laser diode video interface port of the MIO port is opened MIO video I/O port controlLaser diode video interface port of the MIO port is closed Status Response Status ReadbackMemory Status request Entity Status Set status readback location unit Status Response SyntaxSet status readback location type ESC*s#T 2742115#84 1Bh2Ah73h#54h Font response Inquire status readback entityESC*s#I 2742115#73 1Bh2Ah73h#49h Entity status response Location type 1 currently selected font Bound scalable fontsUnbound scalable fonts Download fonts Permanent download fonts Font extended response Use-defined pattern response Symbol set responseSymbol set response may be shown as follows Macro response ESC*s1M 27421154877 1Bh2Ah73h31h4Dh Entity error codesFree space command ESC*s#X 2742115#88 1Bh2Ah73h#58h ESC&r#F 2738114#70 1Bh26h72h#46h Index Secondary font DimensionsPitch Raster transfer VMI Status response Memory 101Transfer start Type of character spacing Chapter PCL5C Color Palettes Introduction ESC*r#U 2742114#85 1Bh2Ah72h#55h Using Simple Color Mode Set Simple ColorCommand Color Modes Short Format Using PCL Color Mode Set PCL Color SettingESC*v#W 2742118#87 1Bh2Ah76h#57h ESC*b1V 11110000B ESC*r1AESC*b1V 10101010B ESC*b1V 11001100B 00h 00h 00h ESC*b#V r, r, r, r, r... → PlaneESC*b#V g, g, g, g, g... → Plane Ffh 80h 40h White reference for value #1, #2, #3 Bits/value #1, #2, #3Long Format Black reference for value #1, #2, #3 Using HP-GL/2 Color Mode Color Palettes ESC*p#P 2742112#80 1Bh2Ah70h#50h Push/Pop Palette Set Destination Raster Height Color GraphicsStart Raster Transfer Set Destination Raster Width Send Raster Data by Plane Enter HP-GL/2 ModeSet Scale Algorithm ESC*t#J 2742116#74 1Bh2Ah70h#4Ah Set Monochrome ModeEnhance Output Set Render Algorithm Download Dither Matrix User-defined Pattern CommandSet Gamma Correction Color White Black Red Green Yellow Blue Magenta Cyan Initialize Set Instruction CommandPC Pen Color Command Function Equivalent Condition Instruction NP n NP Number of Pens CommandCR Color Range Command Index Chapter HP-GL/2 Command Syntax Character Plot Instructions Command List 10/10/03 Introduction Terminology Fills Absolute and Relative Plotting Separators Command SyntaxMnemonic Parameters Scaling HP-GL Graphics WindowUnits Scaling Points P1 and P2 Preparing to Print Graphic Images Function Equivalent Condition CommandsInitialize Commands DF Default set instruction HP-GL/2 origin Returns the graphics mode to initial conditionsInitialize set instruction IR Input relative scaling points Plot Area and Unit Setting InstructionsIP Input scaling point IP P1X, P1Y ,P2X, P2Y Type type of scaling SC ScaleMin X coordinate of P1 Min Y coordinate of P1 Sample Lprint INSP1 RO q IW WindowIW X1, Y1, X2, Y2 RO Rotate coordinate system PD Pen down Pen Control and Plot InstructionsPU Pen up PU X,Y PR X, Y PA Plot absolutePA X, Y PR Relative coordinate pen move Qc Arc angle in degrees AA Draw absolute arcArc centre X coordinate AT X 1, Y 1, X 2, Y 2 , qd AR Draw relative arcAR X, Y, qc, qd AT Absolute arc three point PE Polyline encoded RT Relative arc three point CI r, qd ThisCI Circle plot BZ X1, Y1, X2, Y2, X3, Y3 . . . X1, Y1, X2, Y2, X3, Y3 BR Bezier relativeBR X1, Y1, X2, Y2, X3, Y3 . . . X1, Y1, X2, Y2, X3, Y3 BZ Bezier absolute EA Edge rectangle absolute PM Polygon modePolygon group PM ms EW Edge wedge ER Edge rectangle relativeER X, Y EP Edge polygon RA X, Y RA Fill rectangle absolute WG Fill wedge RR Fill rectangle relativeRR X, Y Specifies Non-zero winding fill method FP Fill polygon AC X, Y Plot Function InstructionsAC Anchor corner Fill type Option FT Fill typeFT n, d, q LA l, v , l , v , l LA Line attribute Any line residue are saved LT Line type selectionLT , n , p ,m n Line pattern number RF i , w, h, p PW Pen widthPW w, ,p w width RF Raster fill definition SV s , option1, option2 s screen type SM cSP n n pen number TR n TR Transparency mode WU Select unit for pen width UL User-defined line typeUL i ,g Character Plot Instructions SD Define standard font Introduction Number Valu Name 9999 Alternate italic Attribute = 6 Stroke weight MeaningAttribute = 2 Spacing Value SA Select alternate font AD Define alternate fontSS Select standard font LB Character plot FI Select primary fontFI font-ID FN Select secondary font LO p DT Define label terminatorDT c , m c Character LO Label origin DI run, rise DI Absolute direction DR run, rise DR Relative direction CP spaces ,lines DV Define variable text pathDV path ,line CP Relative character movement SI width, height CF Character fill modeCF fill , pen SI Set absolute character size SL tan φ SR Set relative character sizeSR width, height SL Character slant ES width ,height TD modeSB n Transparent Data Width LPT Lprint CHR$27 E Lprint CHR$27 %0B Absolute arc three point Relative coordinate pen move Relative direction Window 10/10/03 Chapter PJL HOW to USE PJL Device Attendance Commands About PJL Other printer languages Case of Using PJL with a Non-PJL PrinterPCL jobs Postscript jobs Format 1 ESC%-12345X Format 3 @PJL command words CR LFPJL Syntax and Format @PJL Enter Language = emulation Crlf Variables Invalid Commands PJL Code PCL Job Postscript Job HOW to USE PJLOverview PJL Job Requirement Command Group Command Description Command Group ESC%-12345X Kernel CommandsUEL Command Execute Command @PJL Comment remarks Crlf Enter CommandComment Command Implicit switching Printer Language SwitchingThere are three methods of switching printer languages Explicit switching Name = job name JOB Separation CommandsJOB Command @PJL EOJ Name = job name Crlf EOJ Command Print environment Environment Commands Remember these points about environments PJL reset conditions Initialize PJL environment variables General PJL Environment Variables Autosleep OFF TimeoutsleepResolution Contextswitch Bidi PasswordPowersave Powersavetime Mediatype RET Imageadapt JISB4, LTRS, A4S INTRAY1SIZELETTER, LEGAL, Executive DL, MONARCH, Ledger AUTO, TRAY1, TRAY2 INTRAY5SIZESourcetray AUTO, MPTRAY, TRAY1 EXECUTIVES, COM10, C5, DL JISB5, A4LONG, PostcardTRAY2SIZE A3, JISB4, LEDGER, A4, A4S LETTER, LTRS, Executive Compabitmap Defpaper A4, LETTER, DefaultErrorprint OFF, ON, Exceptcdcc Oemfont Lcddensity FaxringdelayTraypriority MPT1T2T3T4, MPT4T3T2T1 T1T2T3T4 MP, T4T3T2T1MP Ffsuppress PCL-Specific Variables LTRS, EXECUTIVES, B5S PaperLETTER, A4, Legal MONARCH, C5, DL, JISB5 EPSON-Specific Variables IBM-Specific Variables Or Permanent Soft Fonts LTRS, Executives B5SC1, C2, S HL-3260N HPGL-Specific Variables PostScript-Specific Variables SPANISHLATIN, Jisascii ANSIASCII, CHRSET9825Frenchgerman Scandinavian EPSON, Hpgl LETTER, LEGAL, A4, ExectiveON, OFF AUTO, PCL , POSTSCRIPT, IBM DUTCH, SPANISH, Italian FirstprintNORMAL, MIDDLE, High ENGLISH, FRENCH, German PostScript-Specific Variable ISO85, WIN30, HPGERM, Hpspan Mctext @PJL Default Lparm personality variable = value Crlf Default CommandInitialize Command @PJL SET Lparm personality variable = value Crlf Reset CommandSet Command Examples ESC%-12345X@PJL Crlf @PJL Reset Crlf ESC%-12345X Basic format of status readback responses Status Readback CommandsSynchronization with the printer @PJL Inquire Lparm personality variable Crlf value Crlf Inquire Command@PJL Inquire Lparm personality variable Crlf Response Syntax @PJL Dinquire Lparm personality variable Crlf value Crlf Dinquire CommandExample This example requests the PCL-specific settings @PJL Dinquire Lparm personality variable Crlf @PJL Echo words Crlf Echo Command @PJL Info category Crlf Info CommandParameter Valid characters Ascii 33 to 255, SP, HT ID category Information requesting LCD Config categoryParameter Range of Characters Description Font Cartridge Slots Memory category Printer may send back the answer for the above Info commandPrinter sends back the answer for the above command Variables category Printer may send back the answer for the above commandStatus category ORIENTATION=PORTRAIT 2 Enumeratedcrlf Portraitcrlf Ustatus category Timed Ustatus CommandDevice Verbose Status code @PJL Ustatus variable = value CrlfDevice variable JOB variables Example When the following wrong PJL command is sentApplication sends the following commands to the printer Timed variable Variable There are no parameters for this command Ustatusoff CommandJOB Recovery Display = message Device Attendance CommandsRdymsg Command @PJL Rdymsg Display = message Crlf @PJL Stmsg Display = message Crlf Opmsg CommandStmsg Command @PJL Opmsg Display = message Crlf If the operator press the Online key ONLINE, ResetKey PCL-specific variables 26, 31 Demopage Chapter Epson FX-850 Command List Introduction Emulation Details NUL DC4 Introduction Emulation Details Ignored CommandsResolution Conventions Syntax Escape sequence Control Panel Basic printer operations Esc\n1n2 2792n1n2 EscSPn 2732n 1Bh20hnEscan 2797n Esc$n1n2 2736n1n2 Escxn 27120n 1Bh78hn Esc= 2761Esc 2762 Esc# 2735 Esc9 2757 EscCRmode 2713modeEscCR!#R 271333#82 1Bh0Dh21h#52h EscEMn 2725n 1Bh19hn Set up Line Spacing HT 09 09h Using TabsEscjn 27106n 1Bh6Ahn EscDn1n2n3...NUL 2768n1n2n3...00 1Bh44hn1n2n3...00h VT 11 0Bh Using Standard CharactersEscbnm1m2m3...NUL 2798nm1m2m3...00 1Bh62hnm1m2m3...00h Esc/ n 2747n EscSI 2715 EscM 2777Escpn 27112n 1Bh70hn SI 15 0Fh EscSO 2714 EscH 2772EscWn 2787n SO 27 0Eh Escwn 27119n 1Bh77hn Esc5 2753EscSn 2783n EscT 2784 EscIn 2773n Esc!n 2733nEsc6 2754 Esc7 2755 Esctn 27116n 1Bh74hn Using customized charactersEscRn 2782n Esc000 Select standard / downloaded charactersEsc% nNUL 2737n00 Copy ROM character to RAM Esc? cm 2763cm Select image modeReassign image mode Esc*mn1n2image data 2742mn1n2 Escan1n2 2792an1n2 Print 9 bit image EscLn 1n 2image data 2776n1n2 Print single-density imageEscKn 1n 2image data 2775n1n2 Print double-density image EscZn 1n 2image data 2790n1n2 Print double-speed double-density imagePrint quadruple-density image Double-speed double-density image Epson Chapter IBM Proprinter Notation Used in this Emulation Description ESC EscZn1n2image data Set quadruple-density image mode Introduction Controlling the Printer Character Set selection Data Conventions Notation Used in this Emulation Description ESC 27 1Bh Basic Printer OperationNUL 0 0h BEL 07 07h EscQ3 278151 1Bh51h32h Automatic line feedEsc5n 2753n EscQ22 27815050 EscEMn 2725n 1Bh19hn EscXmn 2788mn FormatEscCn 2767n EscCNULn 27670n Esc1 2748 EscR 2782 Restore default tab settingsSet horizontal tabs Set vertical tabs EscP n 2780n Using CharactersEsc6 2756 Esc 2758 Can 24 18h SO 14 0Eh Esc@n1n2n3n4n5n6 279164n1n2n3n4n5n6 1Bh5Bh40hn1n2n3n4n5n6 Esc-n 27126n 1Bh7EhnEscn 2795n 1Bh5Fhn Select character font Select a character from the All Character Code tableEscchar-code 2794Char-code 1Bh5EhChar-code EscLn 1n 2image data 2776n1n2image data EscKn 1n 2image data 2775n1n2image dataData Sample EscYn 1n 2image data 2789n1n2image data Set double-speed, double-density image mode EscZn 1n 2image data 2790n1n2image data Set quadruple-density image mode Perforation skip Pitch Print quality CancelFeeder mode Overline mode Length IBM Proprinter Chapter BAR Code Control Example Program Listings Introduction ESC i n ... n \ 27105n ... n Print BAR Codes or Expanded Characters Bar Code Style = s0 or S0 Bar Code ModeDefinition of Parameters Quiet Zone Bar Code Scaling Width onlyBar Code Human Readable Line On or Off Isbn UPC-E Bar Code & Expanded Character Offset in the Y-axisExpanded Character, Line Block Drawing & Box Drawing Width Expanded Character Rotation Total 8 digits = 0 + 6 digits + 1 check digit Bar Code Data StartCheck digit Expanded Character Data Start Box DrawingLine Block Drawing Label Print Example Program ListingsInter Leaved Codabar Chapter HP-GL Command List Introduction Command List Coordinate system HP-GL SyntaxFont Selection Coordinate System and Printing Area 3400CN/3260N/3450CN Letter Legal Printing area Initialization and Default Setting Instructions Xmin X coordinate of P1 SC Xmin, Xmax, Ymin, Ymax PG Page feed IW Input windowIW X 1, Y 1, X 2, Y X1, Y1 Xn, Yn X2,Y2 Current position 10 *** PAEX1 Qc = Arc Angle Qd = Chord Angle Radius Lprint LT2CI-40,5LT3CI50,5LT4CI- 60,5LT5CI70,5LT6CI80,5 Current position Radius in user units or graphics units EW r,q1,qc,qd Fill pattern specified by Current position WG r,q1,qc,qd LT , n , p FT n , d , q TL l1,l2 PW-Pen widthPW n TL Tick length CA n PT dCS n SS Select standard character set Character SetAnsi Ascii ISO IRV Lprint DI,COSRADSINRADLBRETURN POINTCHR$13CHR$3 CP X,Y CP Character plot Lprint SI2,1.5LBLASERCHR$3 UC X1, Y1, X2, Y2..., Xn, Yn UC User-defined character EscCRRD Dual Context ExtensionsEscCRRL EscCRRM Fill wedge Scale Select alternate character set Select pen HP-GL Appendix a Comparison List IBM Proprinter XL 1870N 5040 P2500 5050 5070N 12501850 1450 JIS B5 Postcard Lower Tray2 Tray1Feed From 767 Appendix a -COMPARISON LIST-8 #0,1,2 Appendix a -COMPARISON LIST-10 1029 #0~6 1026 1028 #0~5 #0~4 #0,1,2 9,1 1027 1024 1028 #75,10150 200 200 300,60 Appendix a -COMPARISON LIST-14 Appendix a -COMPARISON LIST-15 3400 1650 10701270N P2500 2060 Appendix a -COMPARISON LIST-17 2600CN/3450CN Appendix a -COMPARISON LIST-19 5050/5070N/2600CN/3450CN DC2 Esc L n1 n2 Esc Y n1 n2 Esc Z n1 n2 ESC DC4 Can 5070N/2600CN/3450CN BAR Code 3450 P2500 1660e Appendix a -COMPARISON LIST-27 Epson Testprint Resifont Permfont PrtconfigPCL, IBM PCL, PCLXL, Postscript PCL, PCLXL, POSTSCRIPT, IBM, Epson Returned Feature3400CN/ 2600CN 1850/ 1870N @PJL Info Drumlife @PJL Info FeaturesJOB, Timed Crlf ERJ JISB5Ltrs JISB4 Postscr IPT, IBM Epson LightPCL Long StopA3, JIS 500~500 PESCassett ON, OFF OFF, on Finnish ~99 ~240Dutch Spanish First ~15~65535 Transp ThinThick 2, ...n 0x7FFFFFF 1270N/1450/1470N3450CN C1, S C1, C2, S WINL2, WINL5 PSTEXT, Vnintl ROMAN8, ISOL1ISOL2, ISOL5, ISOL6 WINL2, WINL5 WINL2, WONL5 33, 0.5, 1.0, 1.5 10 ~155 columns 10 ~136 columns 3400CN/ 2600CN 1850/1870N HL-1660e1470N 2400C/Ce 1650/1670N SAFRICA, PC8 SwedishmSwedish Norweg PC8, PC8DN, PC850 PC852, PC860 PC863, PC865 HL-1050, HL-1070~145 columns ~126 columns 33, 0.5, 1.0 Inch Appendix B FLASH/PCMCIA Card Commands Introduction HOW to Read the Card Commands Specification Introduction Available Devices HOW to Read the Card Commands SpecificationCommands Error ESC CR ! 12343F ESC CR ! 12358F Slot NoESC CR ! 12340F ESC CR ! 12341F Logical format Command Format CommandPhysical format Command HDD Error HL-1650/1670N/1850/1870N/5070N Type = MCRO, Data Save Data CommandSave specified type Command ESC CR ! 12345F type4byte size4byte data ESC CR ! 12347F ID2byte size4byte data Save data CommandExecute data Command Data Font Save primary font CommandSave secondary font Command DEVICE3 W Error HL-2460/3260N HL-2400Ce/34000CN/7050/2600CN/3450CN Delete all download fonts CommandDelete download font with specified ID Command Save download font with specified ID Command Macro Delete all macros CommandDelete macro with specified ID Command DEVICE3 W Error HL-2460/3260N/2600CN/3450CN DEVICE1 W Error DEVICE2 W Error DEVICE3 W Error Save macro with specified ID Command Available Device Description HL-2460 / 3260N Slot 1 → Slot Slot 2 → Slot 1 is the default settingSlot 2 → Slot Call Macro USE Card Commands from PCLExecute Macros ESC & l ESC # X Designates soft font # as Primary Use Download Fonts Internal HDD %disk2% USE Card Commands from PostscriptDisk#% Appendix C HBP Mode Commands Recommended Command String ESC%-12345X@PJLLF DescriptionsEsc Space 1byte of data Function Command to Enter HBP ModePrinter enters the HBP mode when this command is received @PJLSpaceENTERSpaceLANGUAGESpace=SpaceHBPLF Command List HBP Commands Economy mode setting commands Command @E + Function Commands Detailed ExplanationResolution setting commands Command @L + Function This command sets the printer resolution Command @T+ Sleep mode setting commands CommandThis command sets the sleep time in minutes Recognized as undefined code Mode setting commands Command@M+ @K+ Engine related setting commands CommandEngine related execute commands Command @J+ @G+data length3bytes+data Graphic data input commands CommandFormfeed commands Command Exit commands Command Function Graphic Data Format Appendix C HBP Mode Commands Enter into HBP mode Recommended Command String@PJL Default AUTOSLEEP=0LF @PJL Default TIMEOUTSLEEP= 15LF Appendix C HBP Mode Commands Appendix D Introduction General Specification Command Reference List Introduction Sets of documents are printed and collated General SpecificationFunction Description High-capacity tray @PJL SET/DEFAULT OUTBIN=TrayName Command Reference ListCommands Descriptions PJL output tray & mode setting Format HL-2060/2460/7050 Lower unit PJL mailbox protection & bin number setting Format@PJL SET/DEFAULT MAILBOXPROTECT=TrayNumber PJL avoidance of mailbox bin full Command # setoutputmode PCL output tray setting CommandPS output tray & mode setting Command Esc&l#G 2738108#71 1Bh38h6ch#47h BROutbinMode 0 setpagedevice Statusdict begin BROutbinProtect 4 setpagedevice PS mailbox protection & bin number setting Command# setoutputprotect BROutbinProtect # setpagedevice 10/10/03 Appendix E Commands Descriptions Printed pages can be sorted or stapled PJL output tray Format PCL output tray CommandPS output tray Command Select the Finisher/Stapler unit. Default = PJL staple on/off Format @PJL SET/DEFAULT STAPLE=StapleNameDefault = Upper Left PS staple on/off Command BRjoboffset truesetpagedevice PS job offset on/off CommandPCL job separate Esc&l1T Command PJL job offset on/off Format