Homelite 2060, HL-P2500, HL-1450 ISO85, WIN30, HPGERM, Hpspan Mctext, PostScript-Specific Variable

10/10/03

Variables	Description	Sample Value Range
TIMESETMIN *	Clock: minute setting	0 to 59
TIMESETSEC *	Clock: second setting	0 to 59
TIMESTYLE *	Sets the display style of the clock.	YMD (YYYY/MM/DD hh/mm),
		MDY (MM/DD/YYYY hh/mm),
		DMY (DD/MM/YYYY hh/mm)
SUMMERTIME * Clock: summer time setting		OFF, ON
ZONESET *	Clock: time zone setting	OFF, ON
TIMEZONE *	Clock: time setting of time zone	-24 to +24

NOTE:

The variables marked * are available for HL-2400Ce, HL-3400CN, HL-2600CN and HL-3450CN only.

2.PCL-Specific Variables

The following values are PCL (HP LaserJet emulation) specific and can be set and requested using PJL. These variables must be set using the LPARM : PCL option.

Variables	Description	Sample Value Range
FONTSOURCE	The valid values for	I, C, C1, S,
	FONTSOURCE are
	I (Internal Fonts)
	C (Cartridge Fonts)
	C1 (Card Fonts)
	S (Permanent Soft Fonts)
	If the specified value becomes
	invalid, it is automatically changed
	to the default value.
FONTNUMBER	Font number. This value can be	0, 1, 2, ..n
	seen on the Print Font Test selected
	from the Control Panel. This value
	is automatically changed to the
	lowest value whenever the
	FONTSOURCE setting is changed.
PITCH	Pitch of the default font in units of	0.44, 0.45,	99.99
	characters per inch. The pitch value
	can be specified to two decimal
	places
PTSIZE	Height of the default font in units	4.00, 4.25, .......999.75
	of points. The point size can be
	specified to a quarter of a point
SYMSET	Symbol set	ROMAN8, ISOL1, ISOL2, ISOL5,
		PC8, PC8DN, PC850, PC852, PC8TK,

WINL1, WINL2, WINL5, DESKTOP,

PSTEXT, VNINTL, VNUS,

MSPUBL, MATH8, PSMATH,

VNMATH, PIFONT, LEGAL, ISO2,

ISO4, ISO6, ISO10, ISO11, ISO 14,

ISO15, ISO16, ISO17, ISO21, ISO 25,

ISO 57, ISO60, ISO61, ISO69, ISO84,

ISO85, WIN30, HPGERM, HPSPAN,

MCTEXT

3.PostScript-Specific Variable

The currently defined PostScript specific variable is listed as follows. This variable can be set using the LPARM : POSTSCRIPT option.

Variable	Description	Sample Value Range
PRTPSERRS	The printing of a PostScript error	OFF, ON
	page is enabled or disabled by this
	variable

CHAPTER 5 PJL - 35