Homelite HL-2400CE, HL-P2500, HL-1660E, HL-1450, HL-1050, HL-1250, HL-1470N, HL-1070 PT d, CS n, CA n

10/10/03

XT - X-axis tick

XT [;]

•Plots vertical tick marks as specified by the TL instruction from the current position.

•After plotting, the cursor returns to its point of origin.

•Plotting is performed whether the pen is up or down.

YT - Y-axis tick

YT [;]

•Plots horizontal tick marks as specified by the TL instruction from the current position.

•After plotting, the cursor returns to its point of origin.

•Plotting is performed whether the pen is up or down.

10 '*** XTYTEX ***

20 LPRINT "IN;PA300,279;SP2;PD";

30 LPRINT "PR1300,0;XT;PR1300,0;XT;PU;"

40 END

PT - Pen thickness select

PT [d] [;]

d : Fill line interval (mm)

•Sets the line interval when filling in with solid lines.

•The value for d is a clamped number from 0.0000 to 5.0000.

•The default value (0.3 mm) is used when d is omitted.

3.6.Character Plot Instructions

Instruction	Function
CS	Standard Set Definition
CA	Alternate Set Definition
SS	Select Standard Font
SA	Select Alternate Font
DT	Define Label Terminator
LB	Define Label
DI	Absolute Direction
DR	Relative Direction
CP	Character Plot
SI	Set Absolute Character Size
SR	Set Relative Character Size
SL	Set Character Slant
UC	User-defined Character

CS - Standard character set

CS n[;]

n ; Character set number(*)

•Specifies the standard character set.

•When the parameter field is omitted, character set 0 is specified.

•The value for n is a clamped integer number in the range of 0 to 4, 6 to 7, 9 or 30 to 39.

CA - Alternate character set

CA n[;]

n ; Character set number (*)

•Specifies the alternate character set.

•When the parameter field is omitted, character set 0 is specified.

•The value for n is a clamped integer number in the range of 0 to 4, 6 to 7, 9 or 30 to 39.

CHAPTER 9 HP-GL - 20