Homelite HL-P2500, HL-1660E, HL-2400CE, HL-1450, 2060 FT Fill type, FT n, d, q, Fill type Option

10/10/03

FT - Fill type
FT n(, d(, q))[;]
n ; Fill type	d ; option 1	q ; option 2

•Sets the fill type, interval and angle when filling an area. This setting is effective for the commands FP, RA, RR, WG and CF.

•The value for n must be a clamped integer number

Fill type	Description	Option 1	Option 2
1	Solid black (bi-directional fill)
2	Solid black (single directional fill)
3	hatching (parallel line)	fill interval	fill angle
4	cross-hatching	fill interval	fill angle
10	shading	shading level
11	HP-GL/2 user-defined	raster-fill index
21	PCL cross-hatching	pattern type
22	PCL user-defined	pattern ID
130	shading (one of sixty-four gray scales)	Shading level

•option 1 for n=3 or 4 is the setting for the interval of the lines in the fill. This is specified in current units.

•If d is omitted or 0, it is set to the default value which is 1% of the diagonal distance between P1 and P2.

•Option 2 for n=3 and 4 is the setting of the angle for the lines in degrees.

•If q is omitted, the fill angle already specified will be used.

•The value of q is a clamped real number.

•Option 1 for n=10 is the setting for the shading density. It is specified as a percentage from 0 to 100.

•Option 2 for n=10 is ignored.

•Option 1 for n=11 specifies the HP-GL/2 user-defined raster fill pattern. This uses the index number which is defined by the RF command.

•Option 2 for n=11 is ignored.

•Option 1 for n=21 specifies the PCL cross-hatch patterns. There are 6 types of PCL cross-hatch patterns.

•Option 2 for n=21 is ignored.

•Option 1 for n=22, the PCL user-defined patterns defined by the ESC*c#W command with a unique ID code.

•Option 2 for n=22 is ignored.

•Option 1 for n=130, the 64 gray scale shading density. It is specified as a percentage from 0 to 100.

•Option 2 for n=130 is ignored.

10 ' - Fill Type -

20 WIDTH "LPT1:", 255

30 LPRINT CHR$(27); "E";

40 LPRINT CHR$(27); "%0B";

50 LPRINT "IN;SP1;";

60 LPRINT "PA2000,2000;FT;PR2500,300;ER2500,300;"

70 LPRINT "PR0,300;FT3,80,30;RR2500.300;"

80 LPRINT "PR0,300;FT10,36;RR2500,300;ER2500,300;"

90 LPRINT CHR$(27); "%0A";

100 LPRINT CHR$(27); "E";

110END

<Sample 39>

CHAPTER 4 HP-GL/2 - 31