Manuals / Homelite / Computer Equipment / Printer

Homelite HL-P2500, HL-1660E, HL-2400CE, HL-1450, HL-1050, 2060 Save macro with specified ID Command

Models: HL-1250 HL-1270N HL-1470N 2400C HL-1050 HL-P2500 2060 HL-1660E HL-1070 HL-1450 HL-2400CE

1 431

Download 431 pages 8 Kb

Page 396

10/10/03

3.6.3Save macro with specified ID

Command

ESC & f 1038X

Available Devices

F, A, H, I

Description

This command saves a macro with the ID which is specified with the ESC & f # Y (Macro ID Configuration) command on the device.

When two devices are installed into the printer, the command saves the macros on the device specified by the select storage device command. When only one device is installed, the command saves the macros on that device.

This command is only valid in PCL emulation.

Error HL-1660e/2060/2400C:

43 CARD1 W ERROR

43 CARD2 W ERROR

HL-2400Ce/3400CN/2600CN/3450CN:

43 DEVICE1 W ERROR

43 DEVICE2 W ERROR

43 DEVICE3 W ERROR HL-2460/3260N/7050:

43 CARD ERROR

43 HDD ERROR HL-1650/1670N/1850/1870N/5070N:

43 SERVICE E74

3.6.4Save image (Fixed printing location)

Command

ESC CR ! 12348F

Available Devices

F

Description

After transferring the last print data into the image data area, this command saves the data with the ID which is specified with the ESC & f # Y (Macro ID Configuration) command as a PCL command on the device.

The printing location for the saved data is fixed on the page.

The data can be executed by the data execute command (ESC CR ! 12349 F).

When two devices are installed into the printer, the command saves the data on the device specified with the select storage device command. When only one device is installed, the command saves the data on that device.

This command is only valid in PCL emulation.

Error HL-1660e/2060/2400C:

43 CARD1 W ERROR

43 CARD2 W ERROR

HL-2400Ce/3400CN/2600CN/3450CN:

43 DEVICE1 W ERROR

43 DEVICE2 W ERROR

43 DEVICE3 W ERROR

APPENDIX B - FLASH/PCMCIA CARD COMMANDS - 13

Image 396

Homelite HL-P2500, HL-1660E, HL-1450 Save macro with specified ID Command, DEVICE1 W Error DEVICE2 W Error DEVICE3 W Error

Contents

Revised for Addition of HL-2400Ce/3400CN Ver. BRevised for Addition of HL-1650/1670N/3260N/2460 Ver. CPage Table of Contents HP-GL Graphics Language Glossary Control code Control panel reset Graphics mode initial settings Font LSB RAM ROM Tiff Page Chapter Introduction About the Manual About the Manual Using Word Processing Packages and Spreadsheets Areas of USEGraphics Programming Font Development Introduction Chapter PCL Contents Using Fonts Using Graphics Macros Index Command List Environments Job Control Using graphics Status Readback Introduction Controlling the Printer Control Codes Escape Sequences Esc&k#G 2738107#71 1Bh26h6Bh#47hEsc&s0C 27381154867 1Bh26h73h30h43h Esc&s1C 27381154967 1Bh26h73h31h43h Display functions mode EscY 2789 1B59EscZ 2790 1B5A Factory default environment User default environmentEnvironments Modified print environment JOB Control SizeEsc&l#A 2738108#65 1Bh26h6Ch#41h Postcard Output tray Esc&l#G 2738108#71 1Bh26h6Ch#47h Paper source Esc&l#H 2738108#72 1Bh26h6Ch#48h Left long-edge offset registration Esc&l#U 2738108#85 1Bh26h6Ch#55h Esc&l#Z 2738108#90 1Bh26h6Ch#5Ah Esc&l#S 2738108#83 1Bh26h6Ch#53hEsc&a#G 273897#71 1Bh26h61h#47h Esc&l1T 27381084984 1Bh26h6Ch31h54h EscE 2769EscCRFD EscCR!#R EscCRGL EscCRAB 27136566 1Bh0Dh41h42hEscCRAI 27136573 1Bh0Dh41h49h EscCRI 271373 1Bh0Dh49h Physical Printable areaLogical Text area Portrait page dimensions Landscape page dimensions 3300 2550 3180 1504200 2550 4080 150 3150 2175 3030 3507 2480 3389 2952 2078 2834 Esc&u#D 2738117#68 1Bh26h75h#44h Esc&a#L 273897#76Esc&a#M 273897#77 Resetting the horizontal margins Setting the top marginEsc9 2739 1Bh39h Esc&l#E 2738108#69 1Bh26h6Ch#45h Setting the vertical motion index VMI Setting the horizontal motion index HMIEsc&l#C 2738108#67 1Bh26h6Ch#43h Sample file Setting line spacing Esc&l#D 2738108#68 1Bh26h6Ch#44hText length Esc&l#F 2738108#70 1Bh26h6Ch#46h Length Esc&l#P 2738108#80 1Bh26h6Ch#50hPerforation skip Esc&l#L 2738108#76 1Bh26h6Ch#4Ch Esc&a#R 273897#82 Esc*p#Y 2742112#89 1Bh2Ah70h#79hEsc&a#V 273897#86 Horizontal position Horizontal cursor positioning columns Esc&a#C 273897#67Horizontal cursor positioning units Esc*p#X 2742112#88 1Bh2Ah70h#58h Positioning the cursor using control codes Using the cursor position stackHorizontal cursor positioning decipoints Esc&a#H 273897#72 Esc= 2761 1Bh3Dh Esc&l#O 2738108#79 1Bh26h6Ch#4FhEsc&a#P 273897#80 Lprint Brother Using Fonts Introduction Microsoft Windows 3.1 TrueType Compatible Fonts BR-Script FontsBrother Original Fonts Bound fonts Esc3@ Symbol set Symbol collectionsCriteria for font selection Type of character spacing Stroke weight Typeface Font Selection Commands Esc*c#R 274299#82Escf#Wdata 2749102#87 Character Requirements for MSL Symbol index Character Requirements for Unicode Symbol indexBit Value Designated Use Symbol map Array of UI Symbol set control commandSelecting the symbol set Escsymbol set ID 2740 Escsymbol set ID 2741 Symbol Set Set primary font Symbol setEscs#C 2740115#67 1Bh28h73h#43h Escs#C 2741115#67 1Bh29h73h#43h Escs#P 2740115#80 1Bh28h73h#50h Escs#P 2741115#80 1Bh29h73h#50hEscs#H 2740115#72 1Bh28h73h#48h Escs#H 2741115#72 1Bh29h73h#48h Escs#V 2740115#86 1Bh28h73h#56h Escs#V 2741115#86 1Bh29h73h#56hEscCR!#H 271333#72 1Bh0Dh21h#48h EscCR!#V 271333#86 1Bh0Dh21h#56h Escs#B 2740115#66 1Bh28h73h#42h Escs#B 2741115#66 1Bh29h73h#42hEscs#T 2740115#84 1Bh28h73h#54h Escs#T 2741115#84 1Bh29h73h#54h Typeface Set primary Set secondary HL-1050/1250 FontOCR-A OCR-B Transparent print data Esc&p#X character codes 2738112#88 1Bh26h70h#58hEsc&d#D 2738100#68 Esc&d@ Downloadable font manipulation Esc&*c#D 27384299#68Esc*c#F 27384299#70 Esc#X 2740#88 1Bh28h#58h Creating Downloadable Fonts DownloadingSending the font descriptor Escs#W font descriptor data 2740115#58 1Bh28h73h#88h Bitmap font Special Bitmap font Intellifont Scalable Bound font Intellifont Scalable Unbound font Byte 15 MSB LSB Value Posture Upright Italic Alternate Italic ReservedValue Width Value Structure Symbol set name Symbol set ID Symbol set name OCR a OCR B OCR M600 dpi Value Stroke Weight Value Width type Value Vendor MSL Symbol Index Bit Field Designated Use Unicode Symbol Index MSL Symbol Index Character Complement bits Unicode symbol index character complement bits If font is compatible with 7-bit Ascii otherwise set to Sending a character code Sending a character descriptor and data Bitmap continuation data Byte 0-1 Data Intellifont scalable font dataByte Data Intellifont-scalable contour data Continuation data for Intellifont scalable contour dataCompound character data of Intellifont scalable font TrueType scalable font TrueType character descriptor Byte Data PCL Landscape character Using Graphics Source, Pattern and DestinationFor example Set source transparency Set pattern transparency Esc*v#O 2742118#79 Set area fill identity Esc*c#G 274299#71 User-defined pattern command Esc*c#W data 274299#87For 300 dpi Set pattern reference point User-defined pattern control Esc*c#Q 274299#81Set pattern type Esc*v#T 2742118#84 Pattern example REM --- Background Plotting Rectangles Next Gray REM --- Draw a Pattern Using 8 Gray Scales Raster Graphics EscCRRO 1Bh0Dh52h4FhEscCRRL 1Bh0Dh52h4Ch EscCRRM 1Bh0Dh52h4Dh Esc*r#T 2742114#84 1Bh2Ah72h#54h Esc*r#S 2742114#83 1Bh2Ah72h#53hEsc*b#Y 274298#89 Esc*b#M 274298#77 # = 5 indicates that adaptive compression is to be used Tiff Optional offset count byte = File Length APT OFFCcitt G3 & G4 Esc*r#A 2742114#65 1Bh2Ah72h#41h Esc*b#Wdata 274298#87 1Bh2Ah62h#57hEsc*b#Cimage data 274298#67 1Bh2Ah62h#43h Esc*rB 274211466 1Bh2Ah72h42h Raster graphics example REM --- Transfer Raster Graphics Horizontal 1200-dpi image format mode Raster Graphic Mode ESC*b##W Block 1 Block 2 Block Number of repeats Enter HP-GL/2 mode Vector GraphicsEsc%#B 2737#66 1Bh25h#42h Picture Frame Macros Purpose of a Macro Defining a Macro Esc&f#Y 2738102#89 1Bh26h66h#59hEsc&f0X 27381024888 1Bh26h66h30h58h Esc&f1X 27381024988 1Bh26h66h31h58h Running a Macro Esc&f2X 27381025088 1Bh26h66h32h58hEsc&f3X 27381025188 1Bh26h66h33h58h Esc&f4X 27381025288 1Bh26h66h34h58h Handling Macros AppleTalk configuration Execute dataEscCR!#E 271333#69 MIO video I/O port control Laser diode video interface port of the MIO port is closedLaser diode video interface port of the MIO port is opened Status Readback Memory Status requestEntity Status Status Response Status Response Syntax Set status readback location typeESC*s#T 2742115#84 1Bh2Ah73h#54h Set status readback location unit Inquire status readback entity ESC*s#I 2742115#73 1Bh2Ah73h#49hEntity status response Font response Bound scalable fonts Unbound scalable fontsDownload fonts Location type 1 currently selected font Font extended response Permanent download fonts Symbol set response Symbol set response may be shown as followsMacro response Use-defined pattern response Entity error codes Free space commandESC*s1M 27421154877 1Bh2Ah73h31h4Dh ESC&r#F 2738114#70 1Bh26h72h#46h ESC*s#X 2742115#88 1Bh2Ah73h#58h Index Dimensions PitchRaster transfer Secondary font Status response Memory 101 Transfer startType of character spacing VMI Chapter PCL5C Color Palettes Introduction Using Simple Color Mode Set Simple Color CommandColor Modes ESC*r#U 2742114#85 1Bh2Ah72h#55h Using PCL Color Mode Set PCL Color Setting ESC*v#W 2742118#87 1Bh2Ah76h#57hShort Format ESC*r1A ESC*b1V 10101010BESC*b1V 11001100B ESC*b1V 11110000B ESC*b#V r, r, r, r, r... → Plane ESC*b#V g, g, g, g, g... → PlaneFfh 80h 40h 00h 00h 00h Bits/value #1, #2, #3 Long FormatWhite reference for value #1, #2, #3 Using HP-GL/2 Color Mode Black reference for value #1, #2, #3 Color Palettes Push/Pop Palette ESC*p#P 2742112#80 1Bh2Ah70h#50h Color Graphics Start Raster TransferSet Destination Raster Width Set Destination Raster Height Enter HP-GL/2 Mode Set Scale AlgorithmSend Raster Data by Plane Set Monochrome Mode Enhance OutputSet Render Algorithm ESC*t#J 2742116#74 1Bh2Ah70h#4Ah User-defined Pattern Command Set Gamma CorrectionDownload Dither Matrix Initialize Set Instruction Command PC Pen Color CommandFunction Equivalent Condition Instruction Color White Black Red Green Yellow Blue Magenta Cyan NP Number of Pens Command CR Color Range CommandNP n Index Chapter HP-GL/2 Command Syntax Character Plot Instructions Command List 10/10/03 Introduction Terminology Absolute and Relative Plotting Fills Command Syntax MnemonicParameters Separators HP-GL Graphics Window UnitsScaling Points P1 and P2 Scaling Preparing to Print Graphic Images Commands Initialize CommandsDF Default set instruction Function Equivalent Condition Returns the graphics mode to initial conditions Initialize set instructionHP-GL/2 origin Plot Area and Unit Setting Instructions IP Input scaling pointIP P1X, P1Y ,P2X, P2Y IR Input relative scaling points SC Scale Min X coordinate of P1Min Y coordinate of P1 Type type of scaling Lprint INSP1 Sample IW Window IW X1, Y1, X2, Y2RO Rotate coordinate system RO q Pen Control and Plot Instructions PU Pen upPU X,Y PD Pen down PA Plot absolute PA X, YPR Relative coordinate pen move PR X, Y AA Draw absolute arc Arc centre X coordinateQc Arc angle in degrees AR Draw relative arc AR X, Y, qc, qdAT Absolute arc three point AT X 1, Y 1, X 2, Y 2 , qd RT Relative arc three point PE Polyline encoded This CI Circle plotCI r, qd BR Bezier relative BR X1, Y1, X2, Y2, X3, Y3 . . . X1, Y1, X2, Y2, X3, Y3BZ Bezier absolute BZ X1, Y1, X2, Y2, X3, Y3 . . . X1, Y1, X2, Y2, X3, Y3 PM Polygon mode Polygon groupPM ms EA Edge rectangle absolute ER Edge rectangle relative ER X, YEP Edge polygon EW Edge wedge RA Fill rectangle absolute RA X, Y RR Fill rectangle relative RR X, YWG Fill wedge FP Fill polygon Specifies Non-zero winding fill method Plot Function Instructions AC Anchor cornerAC X, Y FT Fill type FT n, d, qFill type Option LA Line attribute LA l, v , l , v , l LT Line type selection LT , n , p ,m n Line pattern numberAny line residue are saved PW Pen width PW w, ,p w widthRF Raster fill definition RF i , w, h, p SM c SP n n pen numberSV s , option1, option2 s screen type TR Transparency mode TR n UL User-defined line type UL i ,gWU Select unit for pen width Character Plot Instructions Introduction SD Define standard font Valu Name Number Alternate italic Attribute = 6 Stroke weight Meaning Attribute = 2 Spacing Value9999 AD Define alternate font SS Select standard fontSA Select alternate font FI Select primary font FI font-IDFN Select secondary font LB Character plot DT Define label terminator DT c , m c CharacterLO Label origin LO p DI Absolute direction DI run, rise DR Relative direction DR run, rise DV Define variable text path DV path ,lineCP Relative character movement CP spaces ,lines CF Character fill mode CF fill , penSI Set absolute character size SI width, height SR Set relative character size SR width, heightSL Character slant SL tan φ TD mode SB nES width ,height Transparent Data Width LPT Lprint CHR$27 E Lprint CHR$27 %0B Relative coordinate pen move Relative direction Absolute arc three point Window 10/10/03 Chapter PJL HOW to USE PJL Device Attendance Commands About PJL Case of Using PJL with a Non-PJL Printer PCL jobsPostscript jobs Other printer languages Format 3 @PJL command words CR LF PJL Syntax and Format@PJL Enter Language = emulation Crlf Format 1 ESC%-12345X Invalid Commands Variables HOW to USE PJL OverviewPJL Job Requirement PJL Code PCL Job Postscript Job Command Group Command Group Command Description Kernel Commands UEL CommandExecute Command ESC%-12345X Enter Command Comment Command@PJL Comment remarks Crlf Printer Language Switching There are three methods of switching printer languagesExplicit switching Implicit switching JOB Separation Commands JOB CommandName = job name EOJ Command @PJL EOJ Name = job name Crlf Environment Commands Print environment PJL reset conditions Remember these points about environments PJL environment variables Initialize General PJL Environment Variables OFF Timeoutsleep ResolutionContextswitch Autosleep Password PowersavePowersavetime Mediatype RET Imageadapt Bidi INTRAY1SIZE LETTER, LEGAL, ExecutiveDL, MONARCH, Ledger JISB4, LTRS, A4S INTRAY5SIZE SourcetrayAUTO, MPTRAY, TRAY1 AUTO, TRAY1, TRAY2 JISB5, A4LONG, Postcard TRAY2SIZE A3, JISB4, LEDGER, A4, A4SLETTER, LTRS, Executive EXECUTIVES, COM10, C5, DL Defpaper A4, LETTER, Default Errorprint OFF, ON, ExceptcdccOemfont Compabitmap Faxringdelay Traypriority MPT1T2T3T4, MPT4T3T2T1 T1T2T3T4 MP, T4T3T2T1MPFfsuppress Lcddensity PCL-Specific Variables Paper LETTER, A4, LegalMONARCH, C5, DL, JISB5 LTRS, EXECUTIVES, B5S EPSON-Specific Variables IBM-Specific Variables LTRS, Executives B5S C1, C2, S HL-3260NOr Permanent Soft Fonts PostScript-Specific Variables HPGL-Specific Variables ANSIASCII, CHRSET9825 FrenchgermanScandinavian SPANISHLATIN, Jisascii LETTER, LEGAL, A4, Exective ON, OFFAUTO, PCL , POSTSCRIPT, IBM EPSON, Hpgl Firstprint NORMAL, MIDDLE, HighENGLISH, FRENCH, German DUTCH, SPANISH, Italian ISO85, WIN30, HPGERM, Hpspan Mctext PostScript-Specific Variable Default Command Initialize Command@PJL Default Lparm personality variable = value Crlf Reset Command Set CommandExamples @PJL SET Lparm personality variable = value Crlf ESC%-12345X@PJL Crlf @PJL Reset Crlf ESC%-12345X Status Readback Commands Synchronization with the printerBasic format of status readback responses Inquire Command @PJL Inquire Lparm personality variable CrlfResponse Syntax @PJL Inquire Lparm personality variable Crlf value Crlf Dinquire Command Example This example requests the PCL-specific settings@PJL Dinquire Lparm personality variable Crlf @PJL Dinquire Lparm personality variable Crlf value Crlf Echo Command @PJL Echo words Crlf Info Command Parameter Valid charactersAscii 33 to 255, SP, HT @PJL Info category Crlf Information requesting ID category Config category Parameter Range of Characters DescriptionFont Cartridge Slots LCD Printer may send back the answer for the above Info command Printer sends back the answer for the above commandMemory category Printer may send back the answer for the above command Status categoryVariables category ORIENTATION=PORTRAIT 2 Enumeratedcrlf Portraitcrlf Ustatus category Ustatus Command DeviceVerbose Timed @PJL Ustatus variable = value Crlf Device variableStatus code Example When the following wrong PJL command is sent Application sends the following commands to the printerJOB variables Variable Timed variable Ustatusoff Command JOB RecoveryThere are no parameters for this command Device Attendance Commands Rdymsg Command@PJL Rdymsg Display = message Crlf Display = message Opmsg Command Stmsg Command@PJL Opmsg Display = message Crlf @PJL Stmsg Display = message Crlf ONLINE, Reset KeyIf the operator press the Online key Demopage PCL-specific variables 26, 31 Chapter Epson FX-850 Command List Introduction Emulation Details NUL DC4 Introduction Ignored Commands ResolutionEmulation Details Syntax Conventions Control Panel Escape sequence Basic printer operations EscSPn 2732n 1Bh20hn Escan 2797nEsc$n1n2 2736n1n2 Esc\n1n2 2792n1n2 Esc= 2761 Esc 2762Esc# 2735 Escxn 27120n 1Bh78hn EscCRmode 2713mode EscCR!#R 271333#82 1Bh0Dh21h#52hEscEMn 2725n 1Bh19hn Esc9 2757 Set up Line Spacing Using Tabs Escjn 27106n 1Bh6AhnEscDn1n2n3...NUL 2768n1n2n3...00 1Bh44hn1n2n3...00h HT 09 09h Using Standard Characters Escbnm1m2m3...NUL 2798nm1m2m3...00 1Bh62hnm1m2m3...00hEsc/ n 2747n VT 11 0Bh EscM 2777 Escpn 27112n 1Bh70hnSI 15 0Fh EscSI 2715 EscH 2772 EscWn 2787nSO 27 0Eh EscSO 2714 Esc5 2753 EscSn 2783nEscT 2784 Escwn 27119n 1Bh77hn Esc!n 2733n Esc6 2754Esc7 2755 EscIn 2773n Using customized characters EscRn 2782nEsctn 27116n 1Bh74hn Select standard / downloaded characters Esc% nNUL 2737n00Copy ROM character to RAM Esc000 Select image mode Reassign image modeEsc*mn1n2image data 2742mn1n2 Esc? cm 2763cm Print 9 bit image Escan1n2 2792an1n2 Print single-density image EscKn 1n 2image data 2775n1n2Print double-density image EscLn 1n 2image data 2776n1n2 Print double-speed double-density image Print quadruple-density imageEscZn 1n 2image data 2790n1n2 Double-speed double-density image Epson Chapter IBM Proprinter Notation Used in this Emulation Description ESC EscZn1n2image data Set quadruple-density image mode Introduction Character Set selection Controlling the Printer Notation Used in this Emulation Description Data Conventions Basic Printer Operation NUL 0 0hBEL 07 07h ESC 27 1Bh Automatic line feed Esc5n 2753nEscQ22 27815050 EscQ3 278151 1Bh51h32h EscEMn 2725n 1Bh19hn Format EscCn 2767nEscCNULn 27670n EscXmn 2788mn Esc1 2748 Restore default tab settings Set horizontal tabsSet vertical tabs EscR 2782 Using Characters Esc6 2756Esc 2758 EscP n 2780n SO 14 0Eh Can 24 18h Esc-n 27126n 1Bh7Ehn Escn 2795n 1Bh5FhnEsc@n1n2n3n4n5n6 279164n1n2n3n4n5n6 1Bh5Bh40hn1n2n3n4n5n6 Select a character from the All Character Code table Escchar-code 2794Char-code 1Bh5EhChar-codeSelect character font EscKn 1n 2image data 2775n1n2image data DataSample EscLn 1n 2image data 2776n1n2image data Set double-speed, double-density image mode EscYn 1n 2image data 2789n1n2image data Set quadruple-density image mode EscZn 1n 2image data 2790n1n2image data Cancel Feeder modeOverline mode Length Perforation skip Pitch Print quality IBM Proprinter Chapter BAR Code Control Example Program Listings Introduction Print BAR Codes or Expanded Characters ESC i n ... n \ 27105n ... n Bar Code Mode Definition of ParametersBar Code Style = s0 or S0 Bar Code Scaling Width only Bar Code Human Readable Line On or OffQuiet Zone Bar Code & Expanded Character Offset in the Y-axis Expanded Character, Line Block Drawing & Box Drawing WidthExpanded Character Rotation Isbn UPC-E Bar Code Data Start Check digitTotal 8 digits = 0 + 6 digits + 1 check digit Box Drawing Line Block DrawingExpanded Character Data Start Example Program Listings Inter LeavedCodabar Label Print Chapter HP-GL Command List Introduction Command List HP-GL Syntax Font SelectionCoordinate System and Printing Area Coordinate system Printing area 3400CN/3260N/3450CN Letter Legal Initialization and Default Setting Instructions SC Xmin, Xmax, Ymin, Ymax Xmin X coordinate of P1 IW Input window IW X 1, Y 1, X 2, YPG Page feed X1, Y1 Xn, Yn X2,Y2 Current position 10 *** PAEX1 Qc = Arc Angle Qd = Chord Angle Radius Lprint LT2CI-40,5LT3CI50,5LT4CI- 60,5LT5CI70,5LT6CI80,5 Current position EW r,q1,qc,qd Radius in user units or graphics units Fill pattern specified by Current position WG r,q1,qc,qd FT n , d , q LT , n , p PW-Pen width PW nTL Tick length TL l1,l2 PT d CS nCA n Character Set Ansi AsciiISO IRV SS Select standard character set Lprint DI,COSRADSINRADLBRETURN POINTCHR$13CHR$3 CP Character plot CP X,Y Lprint SI2,1.5LBLASERCHR$3 UC User-defined character UC X1, Y1, X2, Y2..., Xn, Yn Dual Context Extensions EscCRRLEscCRRM EscCRRD Scale Select alternate character set Select pen Fill wedge HP-GL Appendix a Comparison List IBM Proprinter XL 1250 18501450 1870N 5040 P2500 5050 5070N JIS B5 Postcard Tray1 FeedFrom Lower Tray2 767 Appendix a -COMPARISON LIST-8 #0,1,2 Appendix a -COMPARISON LIST-10 #0~6 1026 1028 1029 #0~4 #0~5 #75,10 150 200200 300,60 #0,1,2 9,1 1027 1024 1028 Appendix a -COMPARISON LIST-14 Appendix a -COMPARISON LIST-15 1070 1270N P25002060 3400 1650 Appendix a -COMPARISON LIST-17 2600CN/3450CN Appendix a -COMPARISON LIST-19 5050/5070N/2600CN/3450CN DC2 Esc L n1 n2 Esc Y n1 n2 Esc Z n1 n2 ESC DC4 Can BAR Code 5070N/2600CN/3450CN P2500 1660e 3450 Appendix a -COMPARISON LIST-27 Testprint Resifont Permfont Prtconfig PCL, IBMPCL, PCLXL, Postscript PCL, PCLXL, POSTSCRIPT, IBM, Epson Epson Feature 3400CN/ 2600CN 1850/ 1870NReturned @PJL Info Features JOB, TimedCrlf @PJL Info Drumlife JISB5 LtrsJISB4 ERJ Light PCLPostscr IPT, IBM Epson Stop A3, JISLong PES CassettON, OFF OFF, on 500~500 ~99 ~240 DutchSpanish Finnish ~15 ~65535First Thin ThickTransp 1270N/1450/1470N 3450CNC1, S C1, C2, S 2, ...n 0x7FFFFFF ROMAN8, ISOL1 ISOL2, ISOL5, ISOL6WINL2, WINL5 WINL2, WONL5 WINL2, WINL5 PSTEXT, Vnintl 10 ~155 columns 10 ~136 columns 33, 0.5, 1.0, 1.5 HL-1660e 1470N2400C/Ce 1650/1670N 3400CN/ 2600CN 1850/1870N Swedishm SwedishNorweg SAFRICA, PC8 HL-1050, HL-1070 ~145 columns ~126 columns33, 0.5, 1.0 Inch PC8, PC8DN, PC850 PC852, PC860 PC863, PC865 Appendix B FLASH/PCMCIA Card Commands Introduction HOW to Read the Card Commands Specification Introduction HOW to Read the Card Commands Specification CommandsError Available Devices ESC CR ! 12358F Slot No ESC CR ! 12340FESC CR ! 12341F ESC CR ! 12343F Format Command Physical format CommandHDD Error HL-1650/1670N/1850/1870N/5070N Logical format Command Save Data Command Save specified type CommandESC CR ! 12345F type4byte size4byte data Type = MCRO, Data Save data Command Execute data CommandData ESC CR ! 12347F ID2byte size4byte data Save primary font Command Save secondary font CommandDEVICE3 W Error HL-2460/3260N Font Delete all download fonts Command Delete download font with specified ID CommandHL-2400Ce/34000CN/7050/2600CN/3450CN Save download font with specified ID Command Delete all macros Command Delete macro with specified ID CommandDEVICE3 W Error HL-2460/3260N/2600CN/3450CN Macro Save macro with specified ID Command DEVICE1 W Error DEVICE2 W Error DEVICE3 W Error Available Device Description Slot 1 → Slot Slot 2 → Slot 1 is the default setting Slot 2 → SlotHL-2460 / 3260N USE Card Commands from PCL Execute MacrosESC & l Call Macro Use Download Fonts ESC # X Designates soft font # as Primary USE Card Commands from Postscript Disk#%Internal HDD %disk2% Appendix C HBP Mode Commands Recommended Command String Descriptions Esc Space 1byte of dataESC%-12345X@PJLLF Command to Enter HBP Mode Printer enters the HBP mode when this command is received@PJLSpaceENTERSpaceLANGUAGESpace=SpaceHBPLF Function HBP Commands Command List Commands Detailed Explanation Resolution setting commands Command @L + FunctionThis command sets the printer resolution Command Economy mode setting commands Command @E + Function Sleep mode setting commands Command This command sets the sleep time in minutes@T+ Mode setting commands Command @M+Recognized as undefined code Engine related setting commands Command Engine related execute commands Command@J+ @K+ Graphic data input commands Command Formfeed commands CommandExit commands Command Function @G+data length3bytes+data Graphic Data Format Appendix C HBP Mode Commands Recommended Command String @PJL Default AUTOSLEEP=0LF@PJL Default TIMEOUTSLEEP= 15LF Enter into HBP mode Appendix C HBP Mode Commands Appendix D Introduction General Specification Command Reference List Introduction General Specification Function DescriptionHigh-capacity tray Sets of documents are printed and collated Command Reference List Commands DescriptionsPJL output tray & mode setting Format @PJL SET/DEFAULT OUTBIN=TrayName PJL mailbox protection & bin number setting Format @PJL SET/DEFAULT MAILBOXPROTECT=TrayNumberPJL avoidance of mailbox bin full Command HL-2060/2460/7050 Lower unit PCL output tray setting Command PS output tray & mode setting CommandEsc&l#G 2738108#71 1Bh38h6ch#47h # setoutputmode Statusdict begin BROutbinMode 0 setpagedevice PS mailbox protection & bin number setting Command # setoutputprotectBROutbinProtect # setpagedevice BROutbinProtect 4 setpagedevice 10/10/03 Appendix E Commands Descriptions Printed pages can be sorted or stapled PCL output tray Command PS output tray CommandSelect the Finisher/Stapler unit. Default = PJL output tray Format @PJL SET/DEFAULT STAPLE=StapleName Default = Upper LeftPS staple on/off Command PJL staple on/off Format PS job offset on/off Command PCL job separate Esc&l1T CommandPJL job offset on/off Format BRjoboffset truesetpagedevice