Homelite HL-1470N Value Posture, Upright Italic Alternate Italic Reserved, Value Width, Height

10/10/03

10Unbound font. Character codes corresponding to MSL numbers are acceptable.

11Unbound font. Character codes corresponding to Unicode numbers are acceptable.

When a 7-bit font or 8-bit font is selected, it is possible for codes 00H to FFH to load characters or delete them. It is also possible to print the characters if they are defined as transparent print data.

•Style MSB (UW) - combined with the Style LSB to make the style word. The value of the style word is calculated as follows: style word = posture + (4 width) + (32 structure).

Value Posture

0Upright

1Italic

2Alternate Italic

3Reserved

Value Width

0Normal

1Condensed

2Compressed or Extra Condensed

3Extra compressed

4Ultra compressed

5Reserved

6Extended or Expanded

7Extra Extended or Extra Expanded

Value Structure

0Solid

1Outline

2In-line

3Contour

4Solid with Shadow

5Outline with Shadow

6Inline with Shadow

7Contour with Shadow

8-11 Patterned (Complex patterns, subject to type family )

12-15 Patterned with Shadow

16Inverse

17Inverse in Open Border

18-30 Reserved

31Unknown structure

The reserved bits should be set to Zero.

•Baseline position (UI) -

Bitmap font -	the height in dots from the top of the character cell to the baseline. The units of dots is
	the same as the defined font resolution. This number can be in the range 0 to (cell
	height - 1).

Intellifont scalable - a Y coordinate in the design cell.

TrueType scalable - the height in dots from the top of the character cell to the baseline. This should be set to 0.

•Cell width (UI) - ignored by these printers. The width in dots of the character cell. This can be from 1 to 65535.

•Cell height (UI) - ignored by these printers. The height in dots of the character cell. This can be from 1 to 65535.

•Orientation (UB) - 0(portrait), 1(landscape), 2(reverse portrait) or 3(reverse landscape). Ignored by these printers.

•Spacing (B) - the type of spacing, 0 (fixed pitch) or 1 (proportional spacing).

•Symbol set (UI) - a symbol set ID consists of a number and a letter. The symbol set attribute value is calculated as follows: symbol set = (32 x number) + (ASCII value of letter - 64). For example, Math-8 has the symbol set ID ‘8M’ so it would be encoded as (32 x 8) + (77 – 64) = 269.

CHAPTER 2 "PCL" - 55