Homelite HL-1270N, HL-P2500, HL-1660E Commands, Initialization and Default Setting Instructions

10/10/03

3.COMMANDS

3.1.Initialization and Default Setting Instructions

DF - Default set instruction

DF[;]

•Returns the graphics mode to the default conditions.

•The following are the default settings.

	Function		Equivalent	Condition
			Instruction
	Plot mode		PA;	Absolute plotting
	Relative character direction		DR 1,0;	Horizontal
	Line type		LT;	Solid line
	Line pattern length		LT;	4% of distance from P1 to P2
	Window		IW;	Set at limits of printable area
				according to paper size
	Relative character size		SR;	Width=0.75% of P2x - P1x
				Height=1.5% of P2y - P1y
	Symbol mode		SM;	Off
	Tick length		TL;	X-axis: 0.5% of P2y - P1y
				Y-axis: 0.5% of P2x - P1x
	Standard character set		CS 0;	Character set 0
	Alternate character set		CA 0;	Character set 0
	Character set		SS;	Standard character set selected
	Character slant		SL 0;	0 degrees
	Scaling		SC;	Off
	Label terminator		DT chr$(3)	chr$(3)
	Chord angle		-----	5 degrees
	Fill type		FT;	Bi-directional fill, type 1
	Fill distance		FT;	1% of distance from P1 to P2
	Fill slant		FT;	0 degrees
	Pen Thickness		PT;	Set at 0.3 mm
NOTE:		The location of the scaling points(P1, P2) remains constant.

IN - Initialize set instruction

IN[;]

•Returns the graphics mode to the following initial conditions;

Function	Equivalent	Condition
	Instruction
Plot mode	PA;	Absolute
Relative character direction	DR 1,0;	Horizontal
Line type	LT;	Solid line
Line pattern length	LT;	4% of distance from P1 to P2
Window	IW;	Set at limits of printable
		area according to paper size
Relative character size	SR;	Width=0.75% of P2x-P1X
		Height=1.5% of P2y-P1y
Symbol mode	SM;	Off
Tick length	TL;	X-axis: 0.5% of P2y-P1y
		Y-axis: 0.5% of P2x-P1x
Standard character set	CS 0;	Character set 0
Alternate character set	CA 0;	Character set 0
Character set	SS;	Standard character set
		selected
Character slant	SL 0;	0 degrees
Scaling	SC ;	Off
Label terminator	DT chr$(3)	chr$(3)
Chord angle	-----	5 degrees

CHAPTER 9 HP-GL - 6