Homelite HL-1250, HL-P2500, 2060 Esc&l1T 27381084984 1Bh26h6Ch31h54h, EscE 2769, EscCRFD, EscCR!#R

10/10/03

•# = 2 indicates the back face.

If the currently processing page is an odd page, the printer finishes the processing of the page.

If the odd page has already been processed onto the page and the even page has not been processed yet, this command is ignored.

If the currently processing page is an even page, the printer finishes the processing of the page and attaches a dummy (white) page.

If both an even and odd page have been processed and the next odd page has not been processed yet, only a dummy (white) page is attached.

4.1.8.Job separation command

(For HL-3260N/2460)

Esc&l1T (27)(38)(108)(49)(84) <1Bh><26h><6Ch><31h><54h>

It is recommended to insert this command at the end of each job.

4.1.9.Reset

EscE (27)(69) <1Bh><45h>

•A printer reset restores the user default environment, deletes any temporary fonts and temporary macros.

•Any pages that have been transmitted are printed out.

•You can also perform a printer reset using the printer’s control panel or remote printer console program (see the User Guide).

4.1.10. Reset to factory default settings

EscCRFD (27)(13)(70)(68) <1Bh><0Dh><46h><44h>

•This command causes a factory reset to be performed, restoring all the printer’s factory default settings. See the section “Factory default environment” for a list of the factory default settings.

•You can also perform a factory reset using the printer’s control panel or remote printer console program (see the User Guide).

4.1.11. Reset to user settings

EscCR!#R (27)(13)(33)#(82) <1Bh><0Dh><21h>#<52h>

•# can be 0, 1 or 2.

•#0 indicates the current settings are restored. Unlike the Esc E reset command, the Esc CR!0R command resets the input buffer.

•#1 indicates the user settings 1 are restored, if the printer supports multi user settings.

•#2 indicates the user settings 2 are restored, if the printer supports multi user settings (Except for HL-7050).

•Depending on the model, you may be able to lock the control panel settings ("SETTING LOCK=ON"). In that case, parameters 1 and 2 are ignored.

4.1.12. Printer self test

Escz (27)(122) <1Bh><7Ah>

A printer self test causes a test sheet to be printed out to show that the machine is working properly. Depending on the model, you may also see the test pattern for HRC setting.

CHAPTER 2 "PCL" - 20