Homelite HL-2400CE, HL-P2500, HL-1660E, HL-1450, HL-1050, HL-1250, HL-1470N, HL-1070, 2060 Line Spacing

10/10/03

6.3.Line Spacing

Select 1/6" line spacing

Esc2 (27)(50) <1Bh><32h>

•This command sets the line spacing to 1/6". All subsequent line feed operations will move the print position 1/6" down the page.

•This line spacing is the default setting when the printer is switched on or reset.

LPRINT CHR$(27); CHR$(50); 'Set line spacing to 1/6".

Select 1/8" line spacing

Esc0 (27)(48) <1Bh><30h>

This command sets the line spacing to 1/8". All subsequent line feed operations will move the print position 1/8" down the page.

LPRINT CHR$(27); CHR$(48); 'Set line spacing to 1/8".

Select 7/72" line spacing

Esc1 (27)(49) <1Bh><31h>

•This command sets the line spacing to 7/72". All subsequent line feed operations will move the print position 7/72" down the page.

•Since the printer resolution is 600 dots per inch the line spacing will not be exactly 7/72".

LPRINT CHR$(27); CHR$(49); 'Set line spacing to 7/72".

Select n/72" line spacing

EscAn (27)(65)n <1Bh><41h>n

•This command sets the line spacing to n/72". All subsequent line feed operations will move the print position n/72" down the page.

•Since the printer’s resolution is 600 dots per inch the line spacing will not be exactly n/72".

•n must be in the range 1 to 85.

•If n is outside the range 1 to 85 the default line spacing, 1/6" is selected.

LPRINT CHR$(27); CHR$(65); CHR$(10); 'Set line spacing of 10/72".

Select n/216" line spacing

Esc3n (27)(51)n <1Bh><33h>n

•This command sets the line spacing to n/216". All subsequent line feed operations will move the print position n/216" down the page.

•Since the printer’s resolution is 600 dots per inch the line spacing will not be exactly n/216".

•n must be in the range 1 to 255.

LPRINT CHR$(27); CHR$(51); CHR$(25); 'Select line spacing of 25/216".

Perform n/216" line feed

EscJn (27)(74)n <1Bh><4Ah>n

•This command performs a single line feed, moving the print position down the page by n/216".

•This command does not perform a carriage return.

•The current line spacing setting is not affected.

•n must be in the range 0 to 255.

•The actual vertical distance moved may not be exactly the distance you specify due to the printer’s 600 dots per inch resolution.

LPRINT CHR$(27); CHR$(74); CHR$(54); '1/4" line feed

CHAPTER 6 EPSON - 14